Controlling the volume of the speakerYou can control the volume of the projector’s speaker or audio output.buttons1)Press the button / button on the remote control.fYou can also pressqwon the control panel.Increases the volume.Decreases the volume.Using the FUNCTION buttonSome operations in the menu can be assigned to the button on the remote control so that it can be used as aneasy shortcut button.button1)Press the button on the remote control.To assign functions to the button1)Press the menu, sub menu, or details menu) you want to assign.fRefer to “Navigating through the menu” (xpage46) for the operation of the on-screen menu.2)Press and hold the button for 3 seconds or more.NotefAfter settings have been completed, the assigned menu item (main menu, sub-menu, or details menu) will be displayed in[ASSIGNED FUNCTION] of the operation guide under the menu.fPerform the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (xpage73) when deallocating functions.Switching the input signalYou can switch the input signals to project.buttons1)Press,, or button on the remotecontrol.fYou can also press the button on the control panel.Switch to COMPUTER1 input.*1Switch to COMPUTER2 input.Switch to VIDEO input.Switch to HDMI1 input.Switch to HDMI2 input.*1When [COMPUTER2 SELECT] is set to [COMPUTER1 OUT], if you press the button on the remotecontrol, the input signal cannot be changed and the message “KEY NOT APPLICABLE” will appear.Chapter 3Basic Operations - Basic operations by using the remote controlENGLISH-41
