Panasonic PT-VZ570 Operating Instructions Manual

Also see for PT-VW530: Service manual Operating instructions

Contents

Panasonic PT-VZ570 Operating Instructions Manual Manual pdf 53 page image

Notef [DAYLIGHT VIEW] cannot be set to [AUTO] when the [PROJECTOR SETUP] menu → [PROJECTION METHOD] is set to[REAR/DESK] or [REAR/CEILING].f The [AUTO] mode may not function properly if an object is placed on the top of the projector.[DIGITAL CINEMA REALITY](Only for movie-based signal input)You can improve the vertical resolution of 2-2 and 2-3 pull down video.This function is available only with the following signal inputs.525i (480i), 625i (576i), 1125 (1080)/60i, 1125 (1080)/50i, VIDEO signal.1) Press as to select [DIGITAL CINEMA REALITY].2) Press qw or the button.f The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Disables [DIGITAL CINEMA REALITY].[ON] Enables [DIGITAL CINEMA REALITY].[NOISE REDUCTION](Only when the

*1 is selected)You can reduce noises when the input image is degraded and noise is occurring in the image signal.1) Press as to select [NOISE REDUCTION].2) Press qw or the button.f The [NOISE REDUCTION] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Disables [NOISE REDUCTION].[ON] Enables [NOISE REDUCTION].*1 When [COMPUTER1 INPUT SETTING] is set to [Y/C] (Æ page 70)Attentionf When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case,set it to [OFF].[TV-SYSTEM](Only when the

*1 is selected)The projector will automatically detect the input signal, but you can set the color system manually when an unstable signal isinput. Set the color system matching the input signal.*1 When [COMPUTER1 INPUT SETTING] is set to [Y/C] (Æ page 70)1) Press as to select [TV-SYSTEM].2) Press qw or the button.f The [TV-SYSTEM] individual adjustment screen is displayed.3) Press qw to select the color system.f The items will switch each time you press the button.f Select among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM].f Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N],[SECAM], or [PAL60].)[RGB/YPBPR] / [RGB/YCBCR]Set it to [AUTO] normally. If images are not displayed correctly when this is set to [AUTO], set either [RGB], [YCBCR] or [YPBPR]in accordance with the input signal.1) Press as to select [RGB/YPBPR] or [RGB/YCBCR].Chapter 4 Settings - [PICTURE] menuENGLISH - 53