41Editing ModeRecording from a Tape onto a CardStill pictures can be recorded on the Memory Cardfrom scenes that have already been recorded on acassette.1 Set the Mode Dial 38 to Tape PlaybackMode.2 Start playback and set the Camcorder toStill Playback Mode at the scene you wishto record, and press the [PHOTO SHOT]Button 35 .• For other notes concerning this item, see page 59.Audio Dubbing (Optional RemoteControl Only)You can add music or narration to the recordedCassette.• If the tape recorded in the [16bit] Mode is dubbedwith the Audio Dubbing function, the original soundis erased. (If you wish to preserve the original sound,use the [12bit] Mode when recording.)• Audio Dubbing cannot be performed on a recordingmade in LP Mode. (p. 21)1 Press the [ ] Button 67 on the RemoteControl where you want to add new sound.2 Press the [A.DUB] Button 53 on theRemote Control.3 To start Audio Dubbing, press the [ ]Button 67 on the Remote Control. To Cancel Audio DubbingPress the [ ] Button 67 on the Remote Control.The Camcorder is in the Still Playback Mode again. To Play Back the Sound Recorded by12bit Audio DubbingSet [TAPE PLAYBACK MENU] >> [PLAYBACK] >>[12bit AUDIO] >> [ST1], [ST2] or [MIX].ST1: It plays back only the original sound.ST2: It plays back only the sound added by AudioDubbing.MIX: It plays back both the original soundand the sound added by Audio Dubbingsimultaneously.386753Recording Pictures from a Cardonto a TapeCard Images can be recorded to the Tape.1 Set the Mode Dial 38 to Picture PlaybackMode.2 Display the fi rst picture.3 Press the [PHOTO SHOT] Button 35 .• During the copying, the following Indicationappears.• When recording to tape, select the tape positionbefore recording. The picture will be recorded to thetape position when the [PHOTO SHOT] Button ispressed at Step 3.• Photoshot index signals are automatically recorded.353835• It takes a few seconds to record a picture to theTape.This feature is only available with Remote Control.However it is not supplied. If you would like to order,the parts number is LSSQ0411 as a replacementparts. Please refer to page 68.Editing Mode