Panasonic PV-GS16 Operating Instructions Manual

Contents

Panasonic PV-GS16 Operating Instructions Manual Manual pdf 54 page image

54OthersFor assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfoSVGA : 800 or more, less than 1 024XGA : 1 024 or more, less than 1 280SXGA : 1 280 or more, less than 1 600UXGA : 1 600 or more, less than 2 048QXGA : 2 048 or morePICTURE (Cyan): Photoshot ModePICTURE (Red): While Photoshot recording isactivatedPICTURE (Green): While the Card being readPICTURE (Red): No Card (Still Picture Mode) To Change the Counter Display ModeBy changing [C.DISPLAY] on the [DISPLAY]Sub-Menu, you can change the Counter DisplayMode to Tape Counter Indication [COUNTER](0:00.00), Memory Counter Indication [MEMORY](M0:00.00), and Time Code Indication [TIMECODE](0h00m00s00f). (p. 18) By repeatedly pressing the[DISPLAY] Button on the Remote Control (Optional),you can change the Counter Display Mode. To Display Date/Time IndicationTo display Date/Time Indication, set the appropriateDate/Time in [DATE/TIME] on the [DISPLAY]Sub-Menu. (p. 18)You can also press the [DATE/TIME] Button of theRemote Control (Optional) repeatedly to display orchange the Date/Time Indication. To Change the Display ModeBy changing [DISPLAY] on the [DISPLAY] Sub-Menu,you can change the Display Mode to All FunctionDisplay [ALL] and Minimum Display [OFF]. (p. 18) Progressive PhotoshotYou cannot use the Progressive Photoshot Function inthe following cases.When using Tape Recording Mode• Digital Effect Modes in [EFFECT1]• Digital Zoom [D.ZOOM]• 1/750 s or faster shutter speed• When brightness is insufficient• When the MagicPix Function is ON• When the Portrait is usedWhen using Card Recording Mode• When brightness is insufficient• When the MagicPix Function is ONInitializing the ModesYou can change the Menu settings back to theshipping condition.1 Set [INITIAL] >> [INITIAL SET] >> [YES].• The initializing takes a little while.• After the initializing is completed, the[COMPLETED] Indication appears with beeps.• Initializing will not erase a clock setting (p. 21) thathas been adjusted.Warning/Alarm IndicationsIf any one of the following indications lights up orflashes, please check the condition of the Camcorder.DEW (DEW DETECTED/EJECT TAPE):Condensation has occurred. (p. 60)(CHECK REC TAB):The accidental erasure prevention slider on theinserted Cassette is open (that is, set to [SAVE]).You are attempting Audio dubbing or Digitaldubbing on a Tape while setting the accidentalerasure prevention slider to [SAVE].(TAPE NOT INSERTED):No Cassette in inserted. (p. 15)(LOW BATTERY):The Battery is low. Recharge it. (p. 13):The built-in battery is low. (p. 21)(NEED HEAD CLEANING):The video heads are dirty. (pp. 60~61)END (TAPE END):The tape came to an end during recording.REMOTE (CHECK REMOTE MODE):Wrong Remote Control Mode has been selected.(p. 13)UNPLAYABLE TAPE(OTHER FORMAT):You are attempting to play back a tape sectionthat has been recorded with a different TVsystem.UNABLE TO A.DUB(LP RECORDED):Because the original recording was done in LPMode, audio dubbing cannot be performed.INCOMPATIBLE TAPE:This cassette is incompatible.PUSH THE RESET SWITCH:Irregular mechanism is detected. Press the[RESET] Button (p. 64). This may solve theproblem.CARD FULL:Card does not have sufficient memory remaining.Select Picture Playback Mode and deleteunnecessary files.NO CARD:Card is not inserted.NO DATA:There are no recorded files in the card.UNPLAYABLE CARD:You are attempting to play back data which is notcompatible with this Camcorder.CARD ERROR:The Card is not compatible with this Camcorder.COPY INHIBITED:Because the medium is protected by a copyguard, images cannot be recorded correctly.