Panasonic PV-GS80 Operating Instructions Manual

Also see for Palmcorder PV-GS85: Instrucciones de funcionamiento Operating instructions

Contents

Playback modeFrame-by-frame playbackoSet to Tape Playback Mode.1 During playback, move the joystick up toselect the [1_/I I] icon to pause playback.2 Push the -_/VOL+] lever.@W TTowards [T]: normal directionTowards [W]: reversed directionolf you keep pushing the lever, then the imageswill continuously be played back frame byframe.oThe pause icon appears for an instant.Continuous frame-by-frame playback will startafter the pause icon disappears.• To return to normal playbackMove the joystick up to select the [1_/! l] icon tostart playback.Playback on TVImages recorded by this Camcorder can beplayed back on a TV.elnsert a recorded tape or card into thisCamcorder.=Be sure that the power of the unit is turned offbefore connecting it to a TV.1 Connect the Camcorder and a TV.• Connect the Camcorder and a TV by usingthe AV cable O.2 Turn on this Camcorder and set the modedial to the Tape Playback Mode (or CardPlayback Mode).3 Select the input channel on the TV.If the images are not played back correctly onthe TV (e.g. they are displayed vertically),perform the menu operations in accordancewith the aspect ratio of the TV monitor.Set [SETUP] >> [TV ASPECT] >> [16:9] or[4:3].4 Move the joystick up to select the [1_/| |]icon to start playback.eThe image and audio are output on the TV.5 Move the joystick down to select the [m]icon to stop playback.Use the AC adaptor to free you from worryingabout the battery running down.• If the image or audio from thisCamcorder is not output on the TV• Check that the plugs are inserted as far as theygo.• Check the [12bit AUDIO] settings. (-58-)Check the connected terminal.Check the TV's input setting (input switch).(For more information, please read theoperating instructions for the TV.)41LSQT1121