Panasonic PV-GS80 Operating Instructions Manual

Also see for Palmcorder PV-GS85: Instrucciones de funcionamiento Operating instructions

Contents

Edit modeolf you record (dub) images onto another videodevice and then play them back on a wide-screen TV, the images may be stretchedvertically. In this case, refer to the operatinginstructions for the device that you are recording(dubbing) to or read the operating instructionsfor the TV and set to 16:9 (full).• For more information, refer to the operatinginstructions for your TV set and recorder.• When you do not need functional indications ordate and time indication, respectively set[SETUP] >> [DISPLAY] >> [OFF] or set [BASIC]>> [DATE/TIME] >> [OFF] in the Tape PlaybackMode.(When you connect the Camcorder and arecorder with the DV cable, these indicationsmay not appear.)• When neither image nor sound fromthe Camcorder is output to the TV set• Check that the plugs are inserted as far as theygo.• Check the [12bit AUDIO] settings. (-.48-)• Check the connected terminal.45LSQT1121Using the DV Interface Cable forRecording (Digital Dubbing)ii _i_i_i _I_I_I_IHHHHHHHH_HHH_IH_I_I_IHHHHHH_IHHHH_I_I_IHHHH_IHI_I_I_IHH_I_I_IHHHHHHHHHH_IHHHiHHHHHHHHHH_i_i_By connecting other digital video equipment withDV terminal and the Camcorder by using the DVcable PV-DDCg/PV-DDC9-K (optional) O, high-image-quality dubbing can be done in digitalformat.• Set to Tape Playback Mode.(Player/recorder)1 Connect the Camcorder and digital videoequipment with the DV cable.2 Set [ADVANCED] >> [REC STDBY] >> [YES].(Recorder)3 Start playback. (Player)4 Start recording. (Recorder)Move the joystick up to select [O11I] icon.©5 Move the joystick up to select the [O/11]icon again to stop recording. (Recorder)6 Stop playback. (Player)• To cancel the standby for recordingWhen the Camcorder is standby for recording,move the joystick down and select the [11] icon.• Do not plug or unplug the DV cable duringdubbing, or the dubbing may not be completedproperly.• If a picture (bilingual video, etc.) containing mainsound and sub sound has been dubbed, selectthe desired sound by [SETUP] >> [AUDIO OUT]on playback.• Even if you use a device equipped with DVterminals such as IEEE1394, you may not beable to perform digital dubbing in some cases.For more information, see the instructions forequipment connected.