20Playing Back RecordingsBefore you begin...• Connect Camcorder to power source.• Insert recorded tape.Tracking ControlQuick Visual SearchSearch Speed• SP (Standard Play) : 3 times normal.• SLP (Super Long Play) : 9 times normal.During playback, press:• (FAST FORWARD/SEARCH) :fast forward search• (REWIND/SEARCH) : rewind searchPress again or press (PLAY/STILL) fornormal play.Still PicturePress (PLAY/STILL) to freeze picture.Press again for normal play.This feature works best in SLP mode (page 11).Special EffectsNote:• During search, horizontal noise bars will appear.Audio is muted.• To protect video heads and tape, operating modeswill revert as follows after 5 minutes:Still Stand-byStand-by Power off (when Battery Pack is used).• Tape auto-rewinds if played or fast forwarded to end.Note:• Using LCD monitor reduces battery operating time.Return LCD monitor to locked position when not inuse.• During playback, press MENU to adjust LCDmonitor brightness (page 17).1 Press LCD-OPEN and swing LCDmonitor fully open.2 Set POWER to VCR.• If tape has no record tab, auto playbackbegins.• EVF or LCD monitor turns on/off by thePOWER switch.3 Playback function buttons.A (REWIND/SEARCH) : Rewind tape.B (PLAY/STILL) : Play tape.C (FAST FORWARD/SEARCH) :Fast Forward tape.D (STOP) : Stop tape.E VOLUME : During playback, adjustvolume of speaker.Playback on EVF or LCD MonitorAuto TrackingContinuously analyzes each recording foroptimum picture quality.Manual TrackingSome recordings require manualadjustment to reduce noise.Press UP or DOWN until Playbackpicture clears up.Press M.FOCUS to return to AutoTracking.Speaker1Press “W” :Volume down.Press “T” :Volume up.3 E2A BD C04.L354K Basic p20-22(w/o P) 04.1.6, 0:23 PM20