Panasonic RS-232 Protocolfor LCD Projector662 Connection2.1 Communication ParametersSignal Level RS-232CSync Method AsynchronousData Speed 9600 bpsData length 8bitParity NoneStop bit 1X Parameter NoneS Parameter NoneCode (command) JIS X 0201 (Capital Letters Only)The device controlling the projector must match the above parameters. There is no capability tochange the settings of the projector.2.2 Address levelThe address level of this Projector corresponds to address level 0 within the MIS standard. This unitdoes not support multiple machine control from a single communication port.Address level 0 only one projector and the address information is eliminated2.3 RS-232C ConnectionConnector is Dsub 9pin (Female) as seen from the outsidePin # Signal Comment1 No connection2 TXD3 RXD4 Connected Internally5 GRD6 No connection7 CTS8 RTSConnected Internally9 No connection
