Panasonic SC-CH11 Operating Instructions Manual

Also see for SC-CH11: Operating instructions

1 2 Press VOL PRESET to set the volume levelfor timer play.The volume level display will flash.\ J Vu u^CEQDGDCDCBCDCtlQDQJDQIflJD*'-• HAbove display shows the timer play setting on the CD player.13 Adjust the volume level using the volumelevel control.1 4 Press VOL PRESET again.The volume level display will stop flashing and the displaywill change to the previous display.•This presets the volume level into memory.15 Press one of the input select buttons.For timer play on the CO player:Press the CD input select button.You can use timer play for sequential play or program play.For program play, specify the desired tracks.For timer play on the tuner:Press the TUNER input select button, select the desiredband, and tune in a station.For timer play on the tape:Press the TAPE input select button.You can operate both decks 1 and 2 by the timer. When youload cassettes in both deck 1 and deck 2, deck 1 has priorityand plays first.16 Press PLAY TIMER.The system is switched to power standby mode.illuminatesThe timer indicator will appear on the display.Play will start at the set time.To listen to the system after you have set the timer but beforetimer play has taken place:Press the power switch to on and select the desired source. Afteryou have finished listening, return the system to the timer settingmode. (This switches the power to the standby mode.) Even if youchange the volume level after presetting the volume level for thetimer play, the timer play will start with the preset volume level.Notes:• If the power is on, the timer will not function. The system must bein the standby mode.•If you are using the timer to play a compact disc, do not open thedisc holder if you have already programmed tracks. This willcancel the program and play will start from the first track.