Panasonic SC-CH7 Operating Instructions Manual

Also see for SC-CH7: Operating instructions

Spectrum displayThis shows the level of each sound range (frequency range).The following 6 types of display modes are possible.Each time the spectrum mode-select demonstration button ispressed, the display mode changes.1. Peak-hold displayThe peak sound value of each soundrange is held on the display for aboutone second after it occurs.2. Dot displayOnly the upper two parts of the bardisplay are shown, thus maidng thestrength of the sound for each soundrange even easier to see.3. Hustler modsThe peak sound value of each soundrange is displayed in augmentedform.4. Aurora modeThe peak sound value of each soundrange is displayed in Inverted form.5. Afterimage displayAfter indicating the peak sound valueof each sound range, it will fall downgiving an afterimage.6. Repeat modeIndicates each of 1 to 5 sequentiallyfor about five seconds at a time.To temporarily reduce the volume levelI MUTING IPress Wie muting button on the remote control transmitter. Thevolume level is attenuated by 20 dB (approx. 1/10).if the audio output has been muted by the muting button on theremote control transmitter (the muting indicator is lit), the mutedstate can be cancelled by pressing the muting button once again orby setting the volume level to the "— dB” position.-21-