Panasonic SC-HT822 Operating Instructions Manual

Contents

41RQT7708The unit tunes automatically after you plug it in and turn it on for the first time (➜ page 17, Plug-in Auto Tuning), but you can start the processagain if necessary.≥Make sure you have tuned to a television channel. This does not work if you have selected “AU” channel.1 While VHS MENU is displayed (➜ page 40)Press [3 4] to select “CHANNEL SET” and press [ENTER].2 Press [3 4] to select “ANTENNASYSTEM” and press [ENTER].3 Press [3 4] to select “TV” or “CATV”to suit the type of antenna you areusing.Channels are set corresponding to the antenna system you select.This is set automatically when you do Plug-in Auto Tuning.To exit the settings screenPress [MENU] until the screen disappears.Auto tuning searches for TV stations and memorizes every tunedprogram position. Other program positions are skipped. (Channelrange ➜ right)2 Press [3 4] to select “AUTO” andpress [ENTER].Auto tuning starts. It takes three or more minutes to complete.To stop partway throughPress [MENU].You can manually preset channels that are skipped when using theauto channel setting, and manually skip channels that are preset.2 Press [3 4] to select “MANUAL” andpress [ENTER].3 Press [3 4] to select “CH” and [2 1]to select the channel.4 Press [3 4] to select “BLANK” and[2 1] to select “ON” or “OFF”.To exit the settings screenPress [MENU] until the screen disappears.∫ Channel range≥TV mode≥CATV modeCHANNEL SETANTENNA SYSTEMAUTOANTENNA SYSTEM≥ TVCATVSELECT: :END :MENU3 4AUTO CHANNEL SETPROCEEDINGEND :MENU2MANUALBand AirwavesVHF 2–13UHF 14–69Band CableVHF 2–13CATV LOW BAND 95–99CATV MID/SUPER BAND 14–36CATV HYPER BAND 37–65ULTRA BAND66–94100–125SPECIAL CATV CHANNEL 1MANUAL CHANNEL SETCHBLANKSELECTEND :MENU2ON OFF: s/r:34 2 1¥[Remember] Press [VHS] first.