Panasonic SC-HT822 Operating Instructions Manual

Contents

42RQT7708Changing settingsRefer to the remote control illustration on page 40.1 While VHS MENU is displayed (➜ page 40)Press [3 4] to select the “OPTION”and press [ENTER].2 Press [3 4] to select the item andpress [2 1] to change the setting(➜ below).To exit the settings screenPress [MENU] until the screen disappears.Panasonic video cassette recorders use the same remote controlsystem so they may respond unintentionally to a command from thisremote control. Change the code on this unit and its remote control(the two must match) if you place another Panasonic video cassetterecorder close together.≥Use “1”, the factory preset, under normal circumstances.1 While OPTION menu is displayedPress [3 4] to select the “REMOTECONTROL”.2 Press [2 1] to select the code (1 or 2)and press [MENU].The remote control code on the unit has been set.3 While pressing [ENTER] on the remotecontrol, press and hold the numberedbutton ([1] or [2]) corresponding to thecode you selected in step 2.The remote control code on the remote control has been set.The following is displayed when you use a remote control with thedifferent code.The unit’s remote control codeChange its code to match the unit’s (➜ step 3).OPTIONOPTION 1/2OSD ON OFFTAPE SELECTT120 T160 T180BLUE BACK ON OFFJET NAVIGATOR ON OFFDELETE NAVIDATA NO YESJET SEARCH x27 x35SELECT : s/r:END :MENU2 1≥≥≥≥≥≥OPTION 2/2MTS MAIN SAP MONOREMOTE CONTROL 1 2DISPLAYBRIGHT DIM OFFSELECT : s/r:END :MENU2 1≥≥3434≥REMOTE CONTROLItems Settings (Underlined items are the factory preset.)OSD (➜ page 43, On-screen display) ON: Messages appear on the television for about five secondsafter you perform operations.OFF: Messages do not appear.TAPE SELECTSet the length of tape you are using so the unit can show the correctremaining time.T120: T30, T60, T90, T120 tapesT160: T140, T160 tapesT180: T180 tapesBLUE BACK ON: The screen shows a blue background when you playunrecorded portions.OFFJET NAVIGATOR (➜ page 38) ON: Jet Navigator data automatically registered.OFF: Data not registered.DELETE NAVIDATADelete all the Navigation data registered in the unit.See page 38 to delete data on a single tape.NOYES: Then press [ENTER] when you want to delete all the Jetnavigator data.JET SEARCH (➜ page 32)Set the speed for JET SEARCH when playing EP and VP tapes.a27 a35Select a27 if the picture is poor at a35.MTS (➜ page 43, Changing audio)Set the MTS (Multi-channel Television Sound Stereo) receptiontype.MAIN: To receive stereo broadcasts.SAP: To receive SAP when being broadcast.MONO: To receive monaural broadcasts (e.g., when reception ispoor).REMOTE CONTROL 1 2DISPLAYSet the brightness of the unit's display when the unit is in standbymode.BRIGHT: The display is bright all the time.DIM: The display dims when the unit is in standby mode.OFF: The display turns off when the unit is in standby mode.≥When Demo function is on, the display does not turn off even if“OFF” is selected. Select “DEMO OFF” to reduce powerconsumption (➜ page 16).VHS