Panasonic SC-NE5 Operating Instructions Manual

Also see for SC-NE5: Owner's manual Connection guide Connection guide Wi-fi connection guide Operating instructions

Contents

20VQT4U60Sound adjustmentThe following sound effects can be added to the audiooutput.1 Press [SOUND] repeatedly to select the effect.2 Press [3, 4] to select the setting and then press[OK].≥ You may experience a reduction in sound quality when theseeffects are used with some sources. If this occurs, turn thesound effects off.Clock and TimerTo make this setting, point the remote control atthe speaker unit.This is a 24-hour clock.1 Press [SETUP] to select “CLOCK”.2 Press [3, 4] to set the time and then press [OK].≥ To display the clock, press [SETUP] to select “CLOCK” andthen press [OK] once. The time is displayed for 10 seconds.(During standby, press [DISPLAY, iPod MENU] once.)≥ The clock is reset when there is a power failure or when theAC mains lead is removed.≥ Reset the clock regularly to maintain accuracy.You can set the timer so this system turns on at acertain time every day.PreparationSet the clock (l left).∫ Setting the timer1 Press [SETUP] repeatedly to select “TIMER ADJ”.2 Press [3, 4] to set the starting time(“ON TIME”) and then press [OK].3 Press [3, 4] to set the finishing time(“OFF TIME”) and then press [OK].∫ Turn the timer on1 Select the music source*1 and set the desiredvolume.2 Press [SETUP] repeatedly to select “TIMER SET”.3 Press [3, 4] to select “SET” and then press [OK].≥ “F” is displayed.≥ To turn the timer off, select “OFF”.4 Press [Í] to turn this system off.≥ To display the timer settings, press [SETUP] repeatedly toselect “TIMER ADJ” and then press [OK] once.The music source and volume will also be displayed if thetimer is turned on.≥ During standby, if the timer is turned on, press [DISPLAY,iPod MENU] twice to display the settings.≥ This system can be used as normal after the timer is set,however:– Turn this system to standby mode before the timer starttime.– Even if the audio source or the volume is changed, thetimer will still use the audio source and volume that wasset when the timer was turned on.≥ If this system is having a wireless communication problem atthe set time, an electronic sound may go off instead of theset music source. Turn this system off to stop the electronicsound.*1: “CD”, “FM”, “AUX”, “IPOD_DOCK” and“IPOD_PORT” / “USB” can be set as the music source.The sleep timer can turn this system off after a settime.1 Press [SLEEP] repeatedly to set the time (inminutes) and then press [OK].“SLEEP 30” -. “SLEEP 60” -. “SLEEP 90” -. “SLEEP 120”^------------------------ OFF (Cancel) (------------------------b≥ The remaining time is indicated on this system’s displayexcept when other operations are performed.≥ The play timer and sleep timer can be used together. Thesleep timer always has priority.Direct-VocalSurround(D.SURROUND)“LEVEL 1”, “LEVEL 2” or “OFF”.≥ The factory preset is “OFF”.Preset EQ(PRESET EQ)“HEAVY” (heavy), “SOFT” (soft),“CLEAR” (clear), “VOCAL”(vocal) or “FLAT” (flat/off).≥ The factory preset is “HEAVY”.Bass (BASS) orTreble (TREBLE)Adjust the level (j4 to i4).Dynamic Bass(D.BASS)“ON D.BASS” or“OFF D.BASS”.≥ The factory preset is“ON D.BASS”.Setting the clockPlay timerSleep timer