Panasonic SC-NE5 Operating Instructions Manual

Also see for SC-NE5: Owner's manual Connection guide Connection guide Wi-fi connection guide Operating instructions

Contents

24VQT4U60A beat sound or noise is heard while receivingradio broadcast.≥ Confirm the antenna is properly connected. (l 8)≥ Adjust the position of the antenna.≥ Try to keep a certain amount of distance between theantenna and AC mains lead.≥ Try using an outdoor antenna if there are buildings ormountains nearby.≥ Switch the television or other audio player off or separate itfrom this system.≥ Keep this system away from mobile phones if theinterference is apparent.Cannot charge or operate.≥ Have you selected the appropriate selector?Press [iPod/USB] to select either “IPOD_DOCK” or“IPOD_PORT”.≥ Check that the iPod/iPhone/iPad is connected properly.(l 9)≥ The battery of the iPod/iPhone/iPad is depleted. Charge theiPod/iPhone/iPad, and then operate again.≥ Connect the iPod/iPhone/iPad again or try to restart the iPod/iPhone/iPad.≥ When this system is in standby mode, charging will not startwhen using the “IPOD_PORT” connection. Turn this systemon and make sure the charging has started before switchingthis system to standby mode.≥ Charging an iPod/iPhone/iPad whose battery is depleted:– When using the “IPOD_PORT” connection, turn thissystem on. Do not turn this system off until the iPod/iPhone/iPad becomes operational.– When using the “IPOD_DOCK” connection,“CHECKING CONNECTION” will be displayed until theiPod/iPhone/iPad becomes operational, but this systemwill have begun charging.Cannot connect to the network.≥ Confirm the network connection and settings. (l 10)≥ Your wireless network might be set to be invisible. In thiscase select “Manual settings” in “Method 4”. (l 13)≥ This system cannot join a wireless network using WEPsecurity settings with the WPS methods (“Method 1”). Use“Method 4” to join the wireless network. (l 12)≥ Make sure that the multicast function on the wireless networkrouter is set to on (enabled).≥ When “D.CONNECT” is used, if the password for“D.CONNECT” has been changed connect the other deviceto this system using the new password. (l 14)Cannot connect to this system.≥ Display the wireless network name that this system isconnected to and make sure that the device is connected tothe same network. (l 10, 22)≥ If “NET STNBY” is set to “OFF”, the AirPlay compatibledevice cannot be connected when this system is off.≥ Turn off the Wi-Fi setting on the AirPlay compatible device,set “NET STNBY” to “OFF” (l 22) and then turn this systemoff and on. Reconnect the compatible device to the Wi-Finetwork and then select this system as the AirPlay speakersagain.My wireless network router is WPS PBCcompatible, but the pairing does not work.≥ If the network is set to be invisible, the push buttonconfiguration does not work. In this case, either make thewireless network visible while you set up the network for thissystem or use “Method 2”, “Method 3” or “Method 4”.(l 11, 12)Playback does not start.The sound is interrupted.≥ Simultaneous use with other 2.4 GHz devices, such asmicrowaves, cordless telephones, etc., may result inconnection interruptions.Increase the distance between this system and thesedevices.≥ Do not place this system inside a metal cabinet, for it mightblock the Wi-Fi signal.≥ Place this system closer to the wireless network router.≥ If “D.CONNECT” is set to “ON”, place the AirPlay compatibledevice closer to the speaker unit.≥ If several wireless devices are simultaneously using thesame wireless network as this system, try turning off theother devices or reducing their wireless network usage.≥ If the playback stops, check the playback status on the iOSdevice or iTunes.≥ If play does not start (even though the Wi-Fi status indicatorlights in blue and the AirPlay icon is displayed), restartthe wireless network router, turn the Wi-Fi connection on theiOS device or Mac/PC off and on, and then make sure thatyour home wireless network is selected.≥ If the AirPlay icon is not displayed even if Wi-Fi statusindicator lights in blue, try restarting the wireless networkrouter.≥ With some iOS and iTunes versions, it may not be possibleto restart the AirPlay playback if the selector is changed(e.g., “CD”) or this system is turned off, during the AirPlayplayback.In this case, select a different device from the AirPlay icon ofthe Music App or iTunes and then re-select this system asthe output speakers. (l 14)The remote control doesn’t work properly.≥ The remote control and this system are using a differentcode. (l 25, “REMOTE ”)≥ Is the battery depleted or is the battery inserted incorrectly?(l 7)The following messages or service numbers mayappear on this system’s displays.“--:--”≥ You plugged the AC mains lead in for the first time or therewas a power failure recently. Set the time (l 20).“ADJUST CLOCK”≥ Clock is not set. Adjust the clock accordingly.“ADJUST TIMER”≥ Play timer is not set. Adjust the play timer accordingly.“AUTO OFF”≥ This system has been left unused for about 30 minutes andwill shut down within a minute. Press any button to cancel it.RadioiPod/iPhone/iPad operationsAirPlay operationsRemote controlMessages