Panasonic SC-NE5 Operating Instructions Manual

Also see for SC-NE5: Owner's manual Connection guide Connection guide Wi-fi connection guide Operating instructions

Contents

8VQT4U60Connections1 Connect FM indoor antenna (supplied) to thespeaker unit.2 Connect the AC mains lead after all otherconnections are completed.≥ After connecting the AC mains lead to the mains socket, waitfor more than 15 seconds to turn on the Standby/on switch.≥ When this system is turned on, the CD unit and the speakerunit are connected wirelessly.≥ When this system is turned on for the first time afterpurchase, a message prompting you to connect a Bluetooth ®device (“PAIRING”) is displayed. (l 16)≥ This system consumes a small amount of AC power (l 28)even when turned off.≥ In the interest of power conservation, if you will not be usingthis system for an extended period of time, unplug it from thehousehold mains socket.≥ These speakers do not have magnetic shielding. Do notplace them near a television, personal computer or otherdevices easily influenced by magnetism.≥ Tape the antenna to a wall or column in a position with theleast amount of interference. (Use an FM outdoor antenna ifradio reception is poor.)1 Plug the audio cable (not supplied) into the AUXjack.Plug type: ‰3.5 mm stereo2 Press [ , AUX] to select “AUX” and start playbackon the connected device.To select the sound input level of theexternal device1 While in AUX mode, press [PLAY MENU] to select“INPUT LEVEL” and then press [OK].2 Press [3, 4] to select “NORMAL” or “HIGH”.≥ The default setting is “NORMAL”.≥ Switch the equalizer off or turn the volume of the externaldevice down to reduce the input signal. High level of inputsignal will distort the sound.≥ For details, refer to the instruction manual of the otherequipment.≥ The cables and the devices are not supplied.If the CD unit and the speaker unit are not wirelesslyconnected, or the output sound is interrupted, connectthe both units with two audio cables (plug type:‰3.5 mm stereo, not supplied) as illustrated below.≥ We recommend you use cables of less than 5 m.≥ If the cables are connected, the displays show“WIRED MODE” and this system starts wiredcommunication. This system automatically connectswirelessly when the cables are disconnected.Basic connectionAdhesive tape(not supplied)FM indoor antenna(supplied)To a household mainssocketAC mains lead(supplied)Connect an external music device (forAUX mode)Connect the CD unit and thespeaker unit with cables (optional)Audio cable (not supplied)Audio cable (not supplied)