Panasonic SC-PM47 Operating Instructions Manual

RQT653018 Listening operationsAB1251 2 34 5/CLEARLCD -/ J1 2 34 5 6 107 8 9 02SLEEP-AUTO OFF CLOCK/TIMER PLAY/REC1 2 3 DISC4 5 6 ≥107 8 9 0DISPLAY DIMMERAUX TUNER TAPE CDPLAY MODE/PROGRAM/REW/ /FF/ /CLEARMUTINGS SOUND EQ PRESET EQVOLUME13517/REW/ , /FF/7 CD -/ JPROGRAM34DISC4ALBUMCDsProgram playBy remote control onlyThis function allows you to program up to 24 tracks.1 Press [CD 2/ J] and then [L /CLEAR].2 Press [PROGRAM].3 Press [DISC].4 (within 10 seconds or so)Press [1] – [5] to select the disc you want.5 Press the numeric button(s) to select thetrack you want to play in the desiredsequence.6 Repeat steps 3 through 5 until you haveprogrammed all the tracks you want.7 Press [CD 2/ J].Play will start in the programmed sequence.To cancel program play modePress [PROGRAM] in the stop mode.Programmed contents will be saved in memory.To clear all programmed tracksPress [L /CLEAR] in the stop mode. “CLEAR” is displayed.To select a two-digit trackPress [ 10] and then the two numbers you want.A When “CD FULL” appearsThe number of programmed tracks is limited to 24. Nofurther tracks can be programmed.B You can do the following during program mode:• Check program contents.Press [44444/REW/ g] or [33333/FF/f].Every time you press one of the buttons, the track andprogram No. are shown on the display.• Add to the program.Repeat steps 3 through 5.Memory retentionYour program is retained in memory for about 1 week whilethe system is unplugged.To replay your programIf you turned OFF your program with [PROGRAM], you canplay it again as explained below.1. Press [PROGRAM].2. Press [CD 2/ J].If you program a track not on your CDsThe track is initially programmed, but during program play,the player will skip that track and will continue playing fromthe next programmed item.Note• During program play, you can search forward or backwardonly within the current track.• During program play, skipping is always in the programmedorder, whether forward or backward.Specified tracknumberProgram orderIndicates program mode