RQT65305Before useThe remote controlBattery installation12Use of batteries• Align the poles (+ and –) properly when inserting thebatteries.• Do not mix old and new batteries or different types ofbatteries.• Do not recharge ordinary dry cell batteries.• Do not heat or disassemble the batteries. Do not allowthem to contact flame or water.• Remove the batteries if the unit is not to be used for a longtime.• Do not keep together with metallic objects such asnecklaces.• Do not use rechargeable type batteries.• Do not use batteries if the covering has been peeled off.Mishandling of batteries can cause electrolyte leakagewhich can damage items the fluid contacts and may cause afire.If electrolyte leaks from the batteries, consult your dealer.Wash thoroughly with water if electrolyte comes in contactwith any part of your body.Correct method of useOperation notes• Do not place obstacles between the remote control signalsensor and remote control unit.• Do not expose the remote control signal sensor to directsunlight or to the bright light of a fluorescent light.• Take care to keep the remote control signal sensor and theend of the remote control unit free from dust.• If this system is installed in a rack with glass doors, theglass doors’ thickness or color might make it necessary touse the remote control unit a shorter distance from thesystem.To prevent damage• Never place heavy items on top of the unit.• Do not disassemble or reconstruct the unit.• Do not spill water or other liquids into the unit.Placement of speakersPlace the speakers so that the super woofer is on theoutside.Notes• Keep your speakers at least 10 mm (13 / 32˝ ) away from thesystem for proper ventilation.• The super woofers are located on the sides of thespeakers. Leave 10-cm clearance for them to be effective.• These speakers do not have magnetic shielding. Do notplace them near televisions, personal computers or otherdevices easily influenced by magnetism.• To avoid damage to the speakers, do not touch thespeaker cones if you have taken the nets off.Listening cautionSelecting fine audio equipment such as the unit you’ve justpurchased is only the start of your musical enjoyment. Nowit’s time to consider how you can maximize the fun and ex-citement your equipment offers. This manufacturer and theElectronic Industries Association’s Consumer ElectronicsGroup want you to get the most out of your equipment byplaying it at a safe level. One that lets the sound comethrough loud and clear without annoying blaring or distor-tion—and, most importantly, without affecting your sensi-tive hearing.We recommend you to avoid prolonged exposure to exces-sive noise.Sound can be deceiving. Over time your hearing “comfortlevel” adapts to higher volumes of sound. So what sounds“normal” can actually be loud and harmful to your hearing.Guard against this by setting your equipment at a safelevel BEFORE your hearing adapts.To establish a safe level:• Start your volume control at a low setting.• Slowly increase the sound until you can hear itcomfortably and clearly, and without distortion.Once you have established a comfortable sound level:• Set the dial and leave it there.Taking a minute to do this now will help to prevent hearingdamage or loss in the future. After all, we want you listen-ing for a lifetime.EST. 1924Remote controlsignal sensorAbout 7 meters infront of the signalsensor.TransmissionwindowR6, AA, UM-3Superwoofer