Panasonic SC-PM47 Operating Instructions Manual

RQT653026 Listening operationsUsing the timersUsing the play/record timerBy remote control onlyTo check settingsWhile the unit is on and the “rPLAY” (or “rREC”) indicator ison, press [CLOCK/TIMER] so “rPLAY” (or “rREC”) appearson the display.Two seconds after “rPLAY” (or “rREC”) appear, the settingsare displayed in the following order:• For play timer • For record timer1 Play start time 1 Recording start time2 Play finish time 2 Recording finish time3 Play source 3 Recording source4 Playback volumeYou can check the settings even when the system is OFF bypressing [CLOCK/TIMER] twice.To enjoy the desired source after the timer setting iscompletedThe volume level (for play timer) and music source are storedin the timer memory and the timer will start in these presetconditions. However, the CD numbers do not get stored inthe timer memory.1. After step 4, start playing the desired source.2. Reset the CD numbers if you have changed any of them,confirm that a CD or cassette is inserted, then press [f] toput the unit on standby.Note• If you turn the unit off and on again while a timer isfunctioning, the finish time setting will not be activated.• If the unit is on, the timer will not function. The unit must bein the standby mode.• If AUX is selected as the source, when the timer comes on,the system turns on and engages AUX as the source. Ifyou want to playback or record from a connected unit, setthe other unit’s timer to the same time. (See the other unit’sinstruction manual.)SLEEP-AUTO OFF CLOCK/TIMER PLAY/REC1 2 3 DISC4 5 6 ≥107 8 9 0DISPLAY DIMMERAUX TUNER TAPE CDPLAY MODE/PROGRAM/REW/ /FF/ /CLEARMUTINGS SOUND EQ PRESET EQVOLUMECLOCK/TIMERALBUMTimers and others