42LSQT1214Recording≥ This function cannot be used in picturerecording mode.[HDD] [SD]The zoom microphone is linked to the zoomingoperation so that far-away sounds with a tele-shot and close-up sounds with a wide-angle shotare recorded more clearly.¬ Rotate the mode dial to select .Press the MENU button, then select[ADVANCED] # [ZOOM MIC] # [ON]and press the joystick.[HDD] [SD]You can record yourself while viewing the LCDmonitor.¬ Rotate the mode dial to select or.Rotate the LCD monitor towards thelens side.The image is horizontally flipped as if you see amirror image. (However the image recorded isthe same as a normal recording.)≥ When the LCD monitor is rotated towards thelens side, the icon will not be displayed even ifyou press the joystick.≥ Only some indications will appear on thescreen. When [°] appears, return thedirection of the LCD monitor to normal positionand check the warning/alarm indication. (l 91)[HDD] [SD]Gain up mode works with the video light toenhance the light’s brightness and brighten thenatural colours in a scene.≥ Gain up mode cannot be used in picturerecording mode.¬ Rotate the mode dial to select or.Press the LIGHT button.Each time you press the LIGHT button:A Video light and gain up mode on (videorecording mode only):Brighter than when only the video light is on,but washed out images will appear.B Video light on:To eliminate washed out images, use thismode.C Video light offTo use the zoom microphonefunctionRecording yourselfMENURecording with the videolight (SDR-H250)This built-in video light is forrecording in dark places.LIGHTLSQT1214_GN.book 42 ページ 2007年2月8日 木曜日 午後8時50分