50LSQT1214Recording1 Set the AUTO/MANUAL/FOCUSswitch to MANUAL.The icon shown in the illustration is displayedautomatically.2 Move the joystick up to select[ ].3 Move the joystick left or right toselect the white balance mode.To restore to the automatic adjustmentSet the white balance mode to [ ].≥ You can also restore the automatic adjustmentby setting the AUTO/MANUAL/FOCUS switchto AUTO.1 Select [ ], and fill the screenwith a white subject.2 Move the joystick up to select[ ].When the [ ] display changes from flashing toon, setting is complete.≥ When the [ ] display continues flashing, thewhite balance cannot be set because the placeis dark etc. In this case, use the automaticwhite balance.∫ About the white balance sensor AThe white balance sensor detects the type oflight source during recording.Do not cover the white balance sensor duringrecording, or it may not function properly.∫ About the black balanceadjustment (SDR-H250)This is one of the 3CCD system functions thatautomatically adjusts the black when the whitebalance is set in the manual adjustment mode.When the black balance is adjusted, the screen[ ] Auto white balance adjustment[ ] Indoor mode (for recording underincandescent lamps)≥ Incandescent lights, halogen lamps[ ] Outdoor mode≥ Outdoors under a clear sky[ ] Manual adjustment mode≥ Mercury-vapor lamps, sodium lamps,some fluorescent lights≥ Lights used for wedding receptions athotels, stage spotlights in theatres≥ Sunrise, sunset, etc.MNL3/33/3 NEXTNEXT3/3 NEXTMNL3/33/3 NEXTNEXT3/3 NEXTMNLBACKBACKBACKAWBAWBTo set the white balance manuallyMNLBACKBACKBACKBACKMNLBACKBACKBACKALSQT1214_GN.book 50 ページ ２００７年２月８日 木曜日 午後８時５０分
