40LSQT1449The zoom microphone is linked to the zoomingoperation so that far-away sounds with a tele-shot and close-up sounds with a wide-angle shotare recorded more clearly. Rotate the mode dial to select .Select the menu. ( 26) Rotate the mode dial to select or.Rotate the LCD monitor towards thelens side. The image is horizontally flipped as if you seea mirror image. (However the image recordedis the same as a normal recording.) When the LCD monitor is rotated towards thelens side, the icon will not be displayed even ifyou press the joystick. Only some indications will appear on thescreen. When [] appears, return thedirection of the LCD monitor to normal positionand check the warning/alarm indication. ( 98)This unit will resume recording/pause modeabout 0.8 seconds after the LCD monitor isreopened. When in Quick start standby mode about60% of the power used in recording pausemode is being consumed, so the recordingtime will be reduced. Rotate the mode dial to select or.1 Select the menu. ( 26)2 Close the LCD monitor while themode dial is set to or .The status indicator flashes green and the unitgoes into quick start standby mode.3 Open the LCD monitor.The status indicator lights red and the unit isput into recording pause approx. 0.8 secondsafter it is turned on.To cancel Quick startSelect [SETUP] [QUICK START] [OFF] The default setting is on. Quick start standby mode is canceled ifabout 5 minutes elapsedthe mode dial is switchedthe battery is removed or the AC adaptor isdisconnectedTo use the zoom microphonefunction[ADVANCED] [ZOOM MIC] [ON]Recording yourselfQuick start[SETUP] [QUICK START] [ON]
