90LSQT1449With a PCSetup2 Connection and recognitionAfter the software is installed, the unit must be connected to the PC and be correctly recognized by thePC. Remove the supplied CD-ROM from your PC. Connect this unit to the AC adaptorand turn on the unit.1 Connect this unit to a PC.The USB function selection screen will appear.2 Select [PC/RECORDER] [HDD]or [SD CARD] then press thejoystick.This unit is automatically detected by the PC. When the unit is connected to a PC, itspower cannot be turned off. Disconnect theUSB cable before turning this unit off.( 91) Do not disconnect the USB cable or ACadaptor while the access lamp is on or accessicon ( or ) appears on the LCDmonitor. Doing so may damage the data on theHDD or SD card. The HDD and SD card cannot be accessedsimultaneously. It may be necessary to reboot the PC afterconnecting this unit to it for the first time.When the unit is connected to a PC, it isrecognized as an external drive. This unit supports only the readout of datausing the PC. The PC cannot write data to theunit, or erase data from the unit. Depending on the operating environment of thePC, the shape of the drive icon and the drivename will differ. Drive iconsThe icon is displayed in [My Computer(Computer)].When accessing the HDD Windows Vista: Windows XP: Windows 2000: USB cable (supplied) Insert the USB connectors as far as they willgo. Do not use any other USB cables except thesupplied one. (Operation is not guaranteedwith any other USB cables.)About the PC display
