Panasonic SDR-S100PP Service Manual

Also see for SDR-S100E: Service manual

Contents

41.4. How to Discharge the Capacitor on Front PCBCAUTION:1. Be sure to discharge the capacitor on FRONT PCB.2. Be careful of the high voltage circuit on FRONT PCB when servicing.[Discharging Procedure]1. Refer to the disassemble procedure and Remove the necessary parts/unit.2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1kΩ /5W).(an equivalent type of resistor may be used.)3. Put the resistor between both terminals of capacitor on FRONT PCB for approx. 5 seconds.4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.Fig. F1Downloaded From CamcorderManual.com Panasonic Manuals