Dividing a scene to partiallydelete [SDR-T70]/[SDR-H 100]This divides the recorded scenes in two and deletes the front half or back half.[ SDR-T70 1{_ Change the mode to I-_-], and switch play mode selection to [Built-inMemory]/[VIDEO] (-> 62){} Change the mode to [], and switch play mode selection to [HDD]/[VlDEO](-) 62)1 Select the menu. (-) 27)[EDIT SCENE] _ [SPLIT&DELETE]2 Select the scene to be divided,then press the joystick.3 When you reach the point where youwant to divide the sceneSelect [ _i_ ] with the joystick.]5 Select [YES], then press thejoystick to play back the part tobe deleted.• When [NO] is selected, the confirmationmessage appears.Proceed to step 7.6 When you stop the playback, theconfirmation message appears.7 Select [YES], then press thejoystick.• Move the joystick left or right to fastforward/rewind playback.• Using slow-motion playback or frame-by-frame playback makes it easy to searchfor the point where you want to divide thescene. (-> 64)4 Select the half that you want todelete and press the joystick.@To continue dividing and deletingother scenesRepeat steps 2 to 7.To complete editingPress the MENU button.• It is impossible to divide and deletescenes with a short recording time. Thelength of the remaining scenes must be3 seconds or longer.• It is impossible to set the dividing point atthe beginning or the end of the scene.• When a scene that was divided anddeleted using the SPLIT&DELETEfunction is copied to a disc using the DVDburner or the supplied software andplayed back on another device, amaximum of about 1 second of thedeleted part may be played back.• The actual division may slightly slip off thepreviously designated dividing point.ii i iiiiiiiii i72VQT3E42