Panasonic SDR-S71PC Owner's Manual

Also see for SDR-H100P: Owner's manual Service manual Service manual

Panasonic SDR-S71PC Owner's Manual Manual pdf 94 page image

Connecting to a PC• Connect this unit to the PC after the software applications are installed.• Remove the supplied CD-ROM from your PC.O USB cable (supplied)1 Connect this unit to the ACadaptor.• It is possible to use the unit connected tothe PC with the batteries only, but you willnot be able to write data into the unit.• Use the AC adapter to free you fromworrying about the battery running down.2 Turn on the unit.• This function is available in all modes.• When using the battery, the LCD monitorwill be turned off after about 5 seconds.Operating the joystick will cause the LCDmonitor to turn on again.3 Connect this unit to a PC.• Insert the USB connectors as far as theywill go.• Do not use any other USB cables exceptthe supplied one. (Operation is notguaranteed with any other USB cables.)• The Smart wizard screen is automaticallydisplayed when VideoCam Suite 3.5 isinstalled.• This unit is automatically recognized as anexternal drive of the PC. (-_ 97)A USB function selection screen will bedisplayed if VideoCam Suite 3.5 has notbeen installed. Use the joystick to select[PC], then press the center of thejoystick.When you select an option otherthan [PC], reconnect the USB cable.When Windows is used as the PCoperating system, a message promptingto format may display when a SDXC cardis read. (Please be aware that if a media isformatted, then all the data recorded onthe media will be erased.)http://panasonic.net/avc/sdcard/information/SDXC.html94VQT3E42