58 VQT2A30 59VQT2A30Motion pictures and still pictures recorded with this unit can be viewed on TV.For TV settings, see the operating instructions of the TV.Connect the unit and AC adaptor (P.16) and set the mode dial to [ ] or [ ].Connect the unit and TV with the AV cable (supplied).If your TV is not equipped withAV Input Sockets, the 21-pinAdaptor (optional) is necessary.Consult your dealer.VIDEO INAUDIO INInsert the plugs as far as they will go.Change the input mode on the TV.Play back motion pictures or still pictures from the unit. (P.50, 53)To display LCD monitor information on TV→[SETUP]→[EXT. DISPLAY]→[ON]To not display the date, time and other icons see P.24, 28.•With otherproducts 2 Copying to video recordersor DVD recordersMotion pictures recorded with this unit can be copied to TV video recorders andDVD recorders (hereinafter referred to as “recorder”). For recorders settings,see the operating instructions for the recorders.Copying pictures using the AV cable (supplied)Connect the unit and AC adaptor (P.16) and set the mode dial to [ ].Connect the unit and recorder with the AV cable (supplied).If your recorder is not equippedwith AV Input Sockets, the21-pin Adaptor (optional) isnecessary. Consult your dealer.VIDEO INAUDIO INInsert the plugs as far as they will go.Change the input mode on the TV and recorder.Play back motion pictures from the unit (P.50) and start recording on therecorder.After ending recording on the recorder, stop playback on the unit.Do not use any other AV cables except the supplied one.When copied motion pictures are played back on a wide-screen TV, the imagemay be stretched in the vertical direction. In such cases, see the operatinginstructions of the recorder. Also, see the operating instructions for the wide-screen TV and set aspect ratio to 16:9 (full).Copying (dubbing) pictures using DVD recorders with SDcard slotBy inserting SD cards recorded on this unit into DVD recorders with an SD cardslot, pictures can be copied onto hard disk drives and DVDs.After turning off the unit, eject the recorded SD card. (P.19)Insert the SD card into the SD card slot of the DVD recorder.For details, see the operating instructions of the DVD recorder.The video format is converted when motion pictures recorded with this unit arecopied onto hard disk drives or DVDs. The converted motion picture cannot becopied at high speed onto DVD-R discs.Moreover, motion pictures that are copied back onto SD cards using acomputer or other device do not play back on this unit.●●●●Do not use any other AV cables except the supplied one.If images or audio are not output, check the following:That the plugs on the AV cable are inserted into terminal as far as they cangoThat the plugs on the AV cable are connected to the correct terminalsThat input settings and the selected input channel of the TV are correctIf pictures are not displayed correctly on a wide-screen TV, adjust the displaysettings of the TV.If the image is stretched in the vertical direction on the TV using a 4:3 aspectratio→[SETUP]→[TV ASPECT]→[4:3]●●•••●●With otherproducts 1 Playback on TV