Panasonic SDR-SW21 Operating Instructions Manual

Also see for SDR-SW21: Operating instructions

78 VQT2A30 79VQT2A30Connecting the unit to a computerUse the AC adaptor to supply power to this unit and connected devices.Connect the unit and AC adaptor (P.16) and set the mode dial to a positionother than [OFF].Connect this unit to a computer using the USB cable (supplied). (P.74)Select [PC/RECORDER].The SD card in the unit appears on thecomputer as an external drive.•When this unit is connected to the computer, [CAM_SD] appears in [MyComputer].The SD card appears as an external drive (E drive, etc.) in Windows Explorer.While the computer is accessing the SD card of this unit, [ ] appears at thebottom right of the unit’s LCD monitor.Disconnecting the unitClick the [ ] or [ ] icon on the task bar.Click “Safely remove USB Mass Storage Device.”When the disconnection confirmation message appears, click [OK].Disconnect the USB cable (supplied) from the computer.●●●SD card folder structureThe content of the SD card in the unit can be checked from the computer.Motion pictures and still pictures recorded with the unit are saved in the foldertree below.SD card with data recorded on this unitStill pictures (Max. 999) taken in [ ] modeDPOF setting information on still picturesMotion pictures (Max. 99) taken in [ ] modeDo not move, rename, delete, compress, format or perform other operationsto the motion pictures or folders using Windows Explorer or the MacintoshFinder. Motion pictures will no longer play back.To edit motion pictures, use software capable of editing SD-Video files, suchas VideoCam Suite.●●Data not supported by this unit cannot be played back on this unit even ifcopied onto an SD card.●With acomputer 7 Using this unit as anexternal drive (Mass storage) This unit can be used as an external drive.