Panasonic SDR-SW21 Operating Instructions Manual

Also see for SDR-SW21: Operating instructions

84 VQT2A30 85VQT2A30Others 1 Menus (cont.)Recording and playback functions can be used and basic settings made.(For setting procedures, see P.22.)Settings enclosed in are active at the time of purchase.●SETUP menuItem Purpose Settings/Notices Mode PageDISPLAYDisplay current information or settings on the LCD monitor.•Even when [OFF] is set, the operating status, date, world timeand underwater mode displays remain displayed.OFF / ON 28DATE/TIME Select the date and time display mode. OFF / D/T / DATE 24DATE FORMAT Select the date display format. Y/M/D / M/D/Y / D/M/Y 24FORMAT CARD Format SD cards. YES / NO 56QUICK START Start recording instantly. OFF / ON 21ECONOMYTurn off the unit if the unit is not being operated.This function does not work in the following cases.•While using the AC adaptor•While connected to a computer or printer via USBOFF /5 MINUTES : The unit turns off if the unit is not operatedfor about 5 minutes. To resume the unit use,set the mode dial to [OFF] and then thedesired mode position.―BEEP SOUNDAllow operations such as starting and ending recording to besignaled by a beep.When [ON]Beep: •When recording starts or the unit is turned on•When a computer or printer is recognisedBeep-Beep: •When recording stops or the unit is turned offBeep-Beep, Beep-Beep … (4 times consecutively):• If an error that prevents recording occurs, etc. Checkthe message (P.88) that appears on the LCD monitor.OFF / ON ―POWER LCD Brighten the LCD monitor more than usual. / /•[ ] is automatically selected when the AC adaptor isused.25LCD SET Adjust brightness or colour density of the LCD monitor. YES / NO 25TV ASPECT Display images at the aspect ratio of a connected TV. 4:3 / 16:9 58EXT. DISPLAY Display information on a connected TV.OFF / ONWhen the unit has been turned on with the mode dial set to[ ] or [ ], [ON] is set automatically.58RESUME PLAY Continue playback from the point it was stopped. OFF / ON 52INITIAL SET Return all settings except for [LANGUAGE] and [CLOCK SET] totheir defaults at the time of purchase. YES / NO ―DEMO MODEDisplay an introduction to the unit (demonstration mode).The demonstration stops when any operation except pressing the[AUTO] or [MANUAL AF/MF] button is performed, but it will resumeif no operations are performed for approx. 10 or more minutes.OFF : [OFF] is normally set.ON : When the AC adaptor is connected without an SDcard having been inserted, the demonstration starts,and it stops when an SD card is inserted.―