Panasonic SL-SX285 Operating Instructions Manual

Also see for SLSX285 - PORT. CD PLAYER-LOW: Operating instructions

Contents

5Using the Unit with Optional AccessoriesLRHeadphone jack(Ë)Other equipment(White)(Red)Stereo connectioncable(not included)RQT58491Remove the screw fromthe bracket at the rearof the car mountingbase.2Replace the screw in thelower hole of the bracket.BracketScrewdriverUsing the Wired Remote ControlTo start playTo stop playTo turn offthe unitThe remote control can be operated regardless of theHOLD mode of the unit.Preparation:Release the remote control from the HOLD mode.∫ Operation confirmation tones» When an operation button is pressed, a confirmationtone sounds. Refer to the parentheses in the illustra-tion for the different types of confirmation tones.Basic operationSkippingtracksSearchingthrough tracksTo adjust thevolumePress once during off or stop mode.Press once during play.Press and hold during play or stopmode.HOLD(Beep)(Beep...Beep)(Beep...Bee...p)Other operationsTo change sound qualitySee page 4.Press during play.(Press [:] twice to skip to the beginning ofthe previous tracks.)Press and hold during play.VOLForward(Beep Beep)Backward(Beep Beep Beep)≥The volume range is 0–25. (Press and holdto change the volume successively.)≥A tone (beep-beep) sounds when youreach the minimum or maximum volume.Decrease(Beep)Increase(Beep)Using the unit with an audio systemUsing the unit with a car audiosystemItems to be purchasedFor connection to the car audio systemCar stereo cassette adaptor (SH-CDM10A)Connect the car stereo cassette adaptor to theunit’s headphone jack.(When doing this, set this unit’s volume to 10.)For securing the unit and connecting the powersupply:≥Car adaptor (SH-CDC9)≥Car mounting kit (SH-CDF20)Note when using the car mounting kit (SH-CDF20)Note!≥When you switch off the car, volume and sound qualitymay return to the original settings and the resumefunction may work even if you change the disc.≥It may not be possible to use the unit with some typesof car stereos owing to restrictions imposed by theconstruction of the car stereo cassette adaptor.For further details, refer to the instructions of the partconcerned.For your reference:≥Obtain the optional connecting cable if the other equip-ment comes with mini-phone jacks.≥If you connect speakers (active or otherwise) directly tothe unit's headphone jack, ensure they have an imped-ance of 1 k≠ or less.Note!Do not connect the cable to the PHONO terminals onan amplifier.Turn off this unit and the other equipment before operation.1 Connect the remote control to the unit'sheadphone jack.2 Connect the stereo connection cable tothe remote control's headphone jack andthe terminals on the other unit.The unit may malfunction if you connect this cabledirectly to the unit.3 Set the volume to 10.Make further volume adjustments with the otherunit.4 Control play with the buttons on the mainunit.The tone will be heard if you use the buttons on theremote control.CD or AUXWired remote control

/ 8

Related manuals for Panasonic SLSX285 - PORT. CD PLAYER-LOW