192. Setting up the DVRThe following sections detail the initial setup of a DVR.3-1. Setup – Main ScreenWhen booting a system at first, the following messages display. After initializing, select a language and setthe time.To enter the setup menu, select a right button of the mouse or press the SETUP button on the remotecontrol.A default Password is 1111.Table 3.1.1. Setup menu treeThen password input screen will be displayed. User can select a password by pressing a small square boxnext to a password input box. The factory default password is 1111. It is highly recommended to assign anew password to protect the system. User can assign a new password in SECURITY setup menu.CONTROL BAR AUTO HIDE: Set to hide automatically or display continuously a control bar on the bottomside in a Live mode.CHANNEL INFORMATION: Display a channel number, channel name, resolution, frame rate, quality andrecording type of each channel.SYSTEM INFORMATION: Display a software version, storage size, network type, IP address, MACaddress, DDNS status, DVR ID and remote controller ID of the system.SYSTEM LOCK: To lock the system, user input a password. To unlock the system, please press ESCbutton for 5 seconds on a front panel or a remote control. You can also unlock the system when pressingLOCK icon on the screen using a mouse control. Then, the system will ask a password.