485. PTZ ControlTo control the PTZ functions of the camera, select PTZ menu on the screen using the mouse. Select theitem you wish to control the PTZ camera and control them using the mouse or the control button () on the remote control. Please refer to the table 5.1. for the control.Figure 5.1. PTZControl ScreenTable 5.1. Button Functions in PTZ ControlItem DescriptionINITIALIZE Initialize the PTZ settings of the selected camera.PAN / TILT Select PAN/TILT using the mouse or the control button () and press SEL button on the remote control.Adjust the tilt(UP/DOWN) / pan(LEFT/RIGHT) position using themouse or the control button ( ) on the remote control.ZOOM /FOCUSSelect ZOOM/FOCUS using the mouse or the control button () and press SEL button on the remote control.Adjust the zoom(Mouse Wheel Down or Up/Down button of theremote control)/focus(Mouse Wheel Up or Left/Right button of theremote control)position.OSD Select the OSD to enter the menu. Control keys are Right, Left,UP, Down, Select, Far (REW KEY), and Near (FF KEY). Pressthe ESC button to return to the main menu. Press the PTZ buttonto escape from the OSD menu.AUTOSCAN Press the right key ( on the control button to start auto scanPress the left key ( on the control button to stop auto scan.PRESET Select the PRESET and press the left key ( on the controlbutton. Then, number input window will appear. Set the number(3 digits) using the number key and press the SEL to set thepreset number for the current position.Press the right key ( on the control button and set the number(3 digits) to go to the preset number.TOUR Select the TOUR and press the right key ( on the controlbutton. Then, number input window will appear. Set the number(1 digit) using the number key and press SEL to make the groupnumber work.Press the left key ( on the control button to stop tour.User can set the preset number in the tour group of the OSDmenu.NUMBER Available only on the TOUR and PRESET menu.Press the ESC button to return to the main menu.z Preset/ Tour/ OSD/ Autoscan function are available on the specific model AP8777 andPMA-200. (Select it in the NAME of PTZ setup menu)