Panasonic SV-SR100 Operating Instructions Manual

Also see for SVSR100 - SD AUDIO RECORDER: Operating instructions Operating instructions

Panasonic SV-SR100 Operating Instructions Manual Manual pdf 11 page image

11RQT6457PlaybackOther ways of playing CDs and SD cardsPlay modes:Repeat one track (1-`), all tracks (`),play them randomly once (RANDOM) orrepeatedly (` RANDOM)Press [MODE, DEL].Each time you press the button:1-`>`>RANDOM>` RANDOM^-------=Cancel (no indicator)(---------}The mode cancels when you open the disc or card lid.Note:≥When using the above modes (except “`”), you cansearch only within the current track.≥In the “`” mode, you can also skip and search be-tween the first and last tracks. (You cannot skip orsearch back from the first track to the last track whenplaying a CD.)≥You cannot skip or search back to tracks that havebeen played in random or random repeat.CD program play:Play up to 24 tracks in the order youchoose1 Press the numbered buttons while stopped toselect a track.≥For tracks numbered 10 and over, press [S10] thenthe two digits.≥You can also select tracks with [:] or [9].≥“ERROR” appears if you enter a number thatdoesn’t exist.2 Press [ENTER/MEMORY].3 Repeat steps 1 and 2 to program other tracks.4 Press [1/;, CD].The program is cleared when play finishes.∫ “PROGRAM FULL” is displayedIf you have programmed 24 tracks.∫ To check the contents of the programPress [ENTER/MEMORY] during play.The track numbers and their sequence appear in order,one after the other.∫ To clear the programPress [∫, OPR OFF, FUNCTION] during play.Note:≥You cannot program tracks on an SD card.≥Tracks are skipped in the programmed order when youpress [:] or [9].SD AUDIO RECORDERMENUENTER/MEMORY12ABC3SV-SR1004GHI5JKL6MNO7PQRS8TUV010>__9WXYZDEF:9SD OPEN1SD1CD1/;OPR OFFFUNCTIONDEL∫S-XBSMODE2CD OPENRECPAUSEVOLUMEDISPLAYCHARACD1/;SD1S-XBSMODEDEL: ENTER/MEMORY 9 OPR OFFFUNCTION∫SPACE! " #Preparation: Press [∫, OPR OFF, FUNCTION] toselect CD or SD.Boosting the bassPress [S-XBS].Each time you press the button:S-XBS()Cancel (no indicator)Direct play:Start play from a specific track1. Press the character/numbered buttons to selecttrack.≥For tracks numbered 10 and over, press [S10] thenthe two digits.≥For tracks numbered 100 and over, press [S10]twice then the three digits.≥You can also press [:] or [9] to select thetrack.≥“ERROR” appears if you enter a number thatdoesn’t exist on the disc or card.2. Press [1/;, CD] or [1, SD].Play starts at the selected track and plays through tothe end of the disc or card.Program sequenceMCharacter/numberedbuttons