Panasonic SV-SR100 Operating Instructions Manual

Also see for SVSR100 - SD AUDIO RECORDER: Operating instructions Operating instructions

Panasonic SV-SR100 Operating Instructions Manual Manual pdf 14 page image

14RQT6457RecordingSD AUDIO RECORDERMENUENTER/MEMORY12ABC3SV-SR1004GHI5JKL6MNO7PQRS8TUV010>__9WXYZDEF:9SD OPEN1SD1CD1/;OPR OFFFUNCTIONDEL∫S-XBSMODE2CD OPENRECPAUSEVOLUMEDISPLAYCHARA43 2REC SD SPRECREC SD SPRECDC IN 4.5V LINE INRLSTEREOMICË[LINE IN] [MIC]1 a bRECPAUSEOPR OFFFUNCTION∫ENTER/MEMORYMENU: 9SD1SPACE! " #SDPreparation:≥Release the HOLD mode (➡ page 9).≥Release the card’s write-protect switch (➡ page 8).≥Insert an SD card (➡ page 9).1 Connect the other equipment whilethe unit is stopped.Do not connect a microphone and other equipmentat the same time.a Connecting other audio equipmentPurchase a stereo connection (phono) cable.b Connecting a microphonePurchase a stereo microphone.2 Press [∫, OPR OFF, FUNCTION] toswitch to SD.3 Press [REC PAUSE] to enter the re-cording standby mode.4 Press [1, SD] to start recording, thenstart the source (or face the micro-phone towards the source).Recording from a microphone and otherequipment (Main unit only)Recording time meterRecording modeRecording level meter∫ To pause recordingPress [REC PAUSE].A track mark is added.Press [1, SD] to restart recording.∫ To stopPress [∫, OPR OFF, FUNCTION].“CARD Writing” appears on the display while the unitwrites to the card.The unit turns off about 5 minutes later.∫ To turn the unit offPress and hold [∫, OPR OFF, FUNCTION] whilestopped until the display goes out.Note:≥Keep the microphone away from the unit so it doesn’trecord sound from the unit itself.≥Ensure you do not connect the microphone to the head-phone jack.≥Adjust the volume on the other equipment if you makethe connection through the other unit’s headphonejack.Plug type:3.5 mm(1/8 in.) stereoCD()SD(not included) (not included)