Panasonic Switch-M48eG Operation Manual

Also see for PN28480K-ID: Operation manual Operation manual Installation guide

Contents

183Screen DescriptionPort Shows the port number.Refresh Shows the refresh interval of the screen. (Factory default setting:300 seconds)Elapsed TimeSince ResetShows the time elapsed since resetting counters.Counter Name Shows each counter name.Total Shows each counter value.Avg./s Shows the average per second of each counter.Available commands are listed below.N Show the values of the next port.Press "N." The screen shows the counter values of the next port. Disabled in Port48.P Show the values of the previous port.Press "P." The screen shows the counter values of the previous port. Disabled inPort 1.S Switch a target port.Press "S." The command prompt changes to "Select Port number>." Enter theport number you wish to display.F Set the counter refresh mode.Press "F." The command prompt changes to "1 for start to refresh, 2 for setrefresh rate." Press "1" to stop auto-refresh. Press "2" to change the refreshinterval.If you press "2," the command prompt changes to "Input refresh time>." Enteran integer between 5 and 600 (seconds).R Switch to display counter values since resetting counters.Press "R" to reset the counter values. Elapsed Time Since System Reset becomes0.U Set the screen refresh mode.Press "U" to display counters since booting.Q Return to the previous menu.