Panasonic Switch-M48eG Operation Manual

Also see for PN28480K-ID: Operation manual Operation manual Installation guide

Contents

80Available commands are listed below.N Show the next page.Press "N." The screen shows the next port.P Show the previous page.Press "P." The screen shows the previous port.E An EAP Packet forwarding can be assigned to each port.Press "E." The command prompt changes to "Select port number to be changed>."Enter a port number you wish to change. Press "0" to change the settings of allports at a time. Then, the command prompt changes to " Enable or Disable EAPpacket forwarding for port # (E/D)>." Press "E" to enable the function. Press "D" todisable it. As the change is applied, the display on the screen is updatedautomatically.A A name can be assigned to each port.Press "A." The command prompt changes to "Select port number to be changed>."Enter a port number you wish to change. Press "0" to change the settings of allports at a time. Then, the command prompt changes to "Enter port name string>."Enter a name you wish to assign. When you complete the setting change, thedisplay on the screen is automatically updated.J Enable/disable the jumbo frame forwarding function.Press "J." The command prompt changes to " Enable or Disable jumbo status(E/D)>."Press "E" to enable the function. Press "D" to disable the function.Q Return to the previous menu.Note: The screen shows the port status; however, the status is notautomatically updated. To display the latest status, press any key.