64 65FAQs, etc.Technical InformationTechnical InformationClosed caption (CC)For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3;characters might be cut off).The CC can be displayed on the TV if the receiver (such as a set-top box or satellite receiver) has the CC set Onusing the Component or HDMI connection to the TV.If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CCmay overlap on the TV.If a digital program is being output in analog format, the CC data will also be output in analog format.If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or outputmonitor.Aspect Ratio (FORMAT)Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on theformat of the received signal and your preference. (p. 26)(e.g.: in case of 4:3 image)FULL JUSTFULL JUSTEnlarges the 4:3 image horizontally to the screen’s side edges.(Recommended for anamorphic picture)Stretches to justify the 4:3 image to the four corners of thescreen.(Recommended for normal TV broadcast)H-FILL 4:3H-FILLSide barEnlarges the 4:3 image horizontally to the screen’s side edges.The side edges of the image are cut off.Standard(Note that “Image retention” of the side bar may occur fromdisplaying it for a long time.)ZOOMZOOMNote480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9):FULL, JUST, 4:3 or ZOOM1080p / 1080i / 720p:FULL, H-FILL, JUST, 4:3 or ZOOMEnlarges the 4:3 image to the entire screen.(Recommended for Letter Box)Zoom adjustmentsVertical image position and size can be adjusted in “ZOOM”.Select “Zoom adjustments” on the “Picture” menu. (p. 40-41)V-position: Vertical position adjustment V-size: Vertical size adjustmentTo reset the aspect ratio (OK)Message MeaningSD card slot is empty. The card is not inserted.No photos/ No movies The card has no data or this type of data is not supported.Cannot read file The file is broken or unreadable.The TV does not support the format.SD Card warning messagesDo not remove the card while the unit is accessing data (this can damage card or unit).Do not touch the terminals on the back of the card.Do not subject the card to high pressure or impact.Insert the card in the correct direction (otherwise, card may be damaged).Electrical interference, static electricity or erroneous operation may damage the data or card.Back up the recorded data at regular intervals in case of deteriorated or damaged data or erraticoperation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.)Cautions in handling SD Card:Data format for SD Card browsingPhoto: Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF** standardsData format-Baseline JPEG (Sub-sampling: 4:4:4, 4:2:2 or 4:2:0)Max. number of files - 9,999 Image resolution - 160 x 120 to 10,000,000Movie: SD-Video Standard Ver. 1.2 [MPEG-2 (PS format)] and AVCHD Standard compatible files with an audio format that iseither MPEG-1/Layer-2 format or Dolby Digital format(A modified data with a PC may not be displayed correctly.)* DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard** EXIF (Exchangeable Image File Format)NoteFormat the card with the recording equipment.The picture may not appear correctly on this TV depending on the recording equipment used.Display may take some time when there are many files and folders.This function cannot display Motion JPEG and still image not DCF formatted (i.e. TIFF, BMP).Data modified with a PC may not be displayed.Images imported from a PC must be compatible with EXIF 2.0, 2.1 and 2.2.Partly degraded files might be displayed at a reduced resolution.All “.JPG” extension datas in the card will be read in Photo View Mode.The folder and file names may be different depending on the digital camera used.Do not use two-byte characters or other special codes.The card may become unusable with this TV if file or folder names are changed.For the suitable SD Memory Cards, please confirm the latest information on the following website.http://panasonic.jp/support/global/cs (This site is in English only)DIGITAL AUDIO OUT terminalsYou can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifier to theDIGITAL AUDIO OUT terminals.CautionDepending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output.When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSCchannel is selected, the output will be PCM.When playing movie on SD Card Movie player, when the sound has been recorded in Dolby Digital, the output from theDIGITAL AUDIO OUT terminal will be Dolby Digital. When the sound is recorded in the other formats, the output will be PCM.See pages 54-55 for more information