68 69FAQs, etc.SpecificationsTechnical Information Care and CleaningTC-P54Z1Power Source AC 120 V, 60 HzPowerConsumptionMaximum Display Unit: 476 W / Tuner Box: 35 W(Wireless Unit (Receiver) 12 W / Wireless Unit (Transmitter) 10 W)Standby condition Display Unit: 0.2 W / Tuner Box: 0.2 WPlasmaDisplay panelDrive method AC typeAspect Ratio 16:9Visible screen size(W × H × Diagonal)(No. of pixels)54 ” class (54.1 inches measured diagonally)47.1 ” × 26.5 ” × 54.1 ” (1,198 mm × 673 mm × 1,374 mm)2,073,600 (1,920 (W) × 1,080 (H)) [5,760 × 1,080 dots]Sound Audio Output 20 W [10 W + 10 W] (10 % THD)PC signalsVGA, SVGA, XGA, WXGA, SXGAHorizontal scanning frequency 31 - 69 kHzVertical scanning frequency 59 - 86 HzChannel Capability(Digital/Analog) VHF/UHF: 2 - 69, CATV: 1 - 135Operating Conditions Temperature: 32 °F – 104 °F (0 °C – 40 °C)Humidity: 20 % – 80 % RH (non-condensing)Connection TerminalsVIDEO IN 1-2VIDEO: RCA PIN Type × 1 1.0 V [p-p] (75 Ω)S-VIDEO: Mini DIN 4-pin Y: 1.0 V [p-p] (75 Ω) C: 0.286 V [p-p] (75 Ω)AUDIO L-R: RCA PIN Type × 2 0.5 V [rms]COMPONENT IN 1-2 Y: 1.0 V [p-p] (including synchronization)PB, PR : ±0.35 V [p-p]AUDIO L-R: RCA PIN Type × 2 0.5 V [rms]HDMI 1-4 TYPE A Connector × 4• This TV supports “HDAVI Control 4” function.PC D-SUB 15PIN: R,G,B / 0.7 V [p-p] (75 Ω)HD, VD / 1.0 - 5.0 V [p-p] (high impedance)RS232C (Serial) D-sub 9pin for external controlLAN (for VIERA CAST IPTV) RJ45 (10BASE-T/100BASE-TX)Card slot SD CARD slot × 1DIGITAL AUDIO OUT PCM / Dolby Digital, Fiber OpticFEATURES3D Y/C FILTER CLOSED CAPTIONV-Chip IPTV (VIERA CAST)Photo viewer Movie player HDAVI Control 4Dimensions( W × H × D )DisplayUnit Including pedestal 56.3 ” × 35.2 ” × 15.0 ” (1,428 mm × 893 mm × 379 mm)Display Unit only 56.3 ” × 32.3 ” × 1.0 ” (1,428 mm × 820 mm × 25 mm)Tuner Box 17.0 ” × 2.4 ” × 9.5 ” (430 mm × 59 mm × 240 mm)Wireless Unit (Transmitter)Wireless Unit (Receiver)7.5 ” × 2.8 ” × 2.8 ” (190 mm × 69 mm × 70 mm)5.1 ” × 5.3 ” × 1.9 ” (128 mm × 133 mm × 46 mm)MassDisplayUnit Including pedestal 83.8 lb (38.0 )Display Unit only 70.6 lb (32.0 )Tuner Box 6.7 lb (3.0 )Wireless Unit (Transmitter)Wireless Unit (Receiver) 0.7 lb (280 )0.9 lb (400 )16 7 8394 51015141312112Technical Information (Continued)Care and CleaningFirst, unplug the Power cord plug from the wall outlet.Display panelThe front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild liquid dish soap dilutedby 100 times the amount of water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of thedisplay panel, then wipe it evenly with a dry cloth of the same type until the surface is dry.Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatilesubstances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected.CabinetIf the cabinet becomes dirty, wipe it with a soft, dry cloth.If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the cloth dry.Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth.Do not allow any mild liquid dish soap to come into direct contact with the surface of the Plasma TV.If water droplets get inside the unit, operating problems may result.Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet surfacemay be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles madefrom rubber or PVC.PedestalCleaningWipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water towhich a small amount of mild liquid dish soap has been added and then wipe with a dry cloth.Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surfacecoating. (If using a chemically-treated cloth, follow the instructions supplied with the cloth.)Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-termcontact with rubber, vinyl products, or the like. (Doing so will cause deterioration.)Wireless Unit (Receiver and Transmitter)Wipe the glossy surface of Transmitter and Receiver gently with the Cleaning cloth (included).PC Input Terminals ConnectionComputer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequencyof 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)Some PC models cannot be connected to the set.There is no need to use an adapter for computers with IBM PC/AT compatible D-sub 15P terminal.The maximum resolution: 1,280 × 1,024If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity.Signal Names for D-sub 15P ConnectorPin No. Signal Name Pin No. Signal Name Pin No. Signal NameR GND (Ground) NC (not connected)G GND (Ground) NCB GND (Ground) HD/SYNCNC (not connected) NC (not connected) VDGND (Ground) GND (Ground) NCPin Layout for PC Input TerminalSpecificationsNoteDesign and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.Dimensions and Mass are the values for a speaker installation.15.0 ” (379 mm) 17.0 ” (430 mm)4.4 ” (110 mm) 2.8 ”(70 mm) 1.9 ”(46 mm)1.0 ” (25 mm)2.4 ”(60 mm)2.4 ”(59 mm)56.3 ” (1,428 mm)9.5 ”(240 mm)10.6 ”(268 mm)7.5 ”(190 mm)5.1 ”(128 mm)1.7 ”(43 mm)32.3 ” (820 mm)35.2 ” (893 mm)19.7 ”(500 mm)9.5 ” (240 mm)9.9 ” (249 mm)5.3 ” (133 mm)2.8 ” (69 mm)4.8 ” (120 mm)51.3” (1,302 mm)[TC-P54Z1]Display Unit Tuner Box Wireless Unit(Transmitter) (Receiver)