Panasonic TH-103VX200U Operating Instructions Manual

Contents

Panasonic TH-103VX200U Operating Instructions Manual Manual pdf 19 page image

19Selecting the input signalPress to select the input signal to be played back from the equipmentwhich has been connected to the Plasma Display.HDMI input terminals in HDMI 1 to HDMI 4.Component or RGB input terminal in COMPONENT/RGB IN.*PC input terminal in PC IN.* “COMPONENT” may be displayed as “RGB” depending on thesetting of “COMPONENT/RGB-IN SELECT”. (see page 44)Input terminal in Terminal BoardWhen a dual input Terminal Board is installed, “SLOT INPUT A” and “SLOT INPUT B” aredisplayed.When an optional Terminal Board is installed:Using dedicated buttons for input selectionNotes:• Selecting is also possible by pressing the INPUT button on the unit.• Select to match the signals from the source connected to the component/RGB input terminals. (see page 44)• Image retention (image lag) may occur on the plasma display panelwhen a still picture is kept on the panel for an extended period. Thefunction that darkens the screen slightly is activated to prevent imageretention (see page 63), but this function is not the perfect solution toimage retention.INPUTMENUENTER/HDMI1HDMI2HDMI3HDMI4COMPONENTPCINPUTSLOT INPUTHDMI1HDMI2HDMI3HDMI4COMPONENTPCINPUTPress to select HDMI signal terminals in HDMI 1 to HDMI 4.Press to select component or RGB signal terminal in COMPONENT/RGB IN.Press to select PC signal terminal in PC IN.Press to select Input terminal in Terminal Board.For dual input Terminal Board, you can select either input terminalusing A or B button.