Panasonic TH-103VX200U Operating Instructions Manual

Contents

Panasonic TH-103VX200U Operating Instructions Manual Manual pdf 58 page image

Using Network FunctionThis unit has a network function to control the network connected display with your computer.Note:To use the network function, set each “NETWORK SETUP” setting and make sure to set the “CONTROL I/F SELECT”to “LAN”. (see page 55)When “LAN” is set, power is supplied to LAN circuit, and power indicator is lit orange under the condition of power offwith remote control (stand-by state).Example of Network ConnectionCommand ControlNetwork function of the unit can control the unit in the same way as serial control from a network.Supported commandsCommands used in the serial control are supported. (see page 16)Note:Consult your local Panasonic dealer for detail instructions on command usage.Hub or broadband routerLAN cable(not supplied)Notes:• Lay the LAN cable away from other connection cables (excluding the power cord).• Make sure the broadband router or hub supports 10BASE-T/100BASE-TX.• To connect a device using 100BASE-TX, use “category 5” LAN cable.• Touching the LAN terminal with a statically charged hand (body) may cause damage dueto its discharge.Do not touch the LAN terminal or a metal part of the LAN cable.• For instructions on how to connect, consult your network administrator.COMPUTERDisplay (main unit, rear)Securing the LAN cable (TH-85VX200U)ClamperNote: In accordance with the Installation Instructions, secure the LAN cable so that it will not become near thedisplay unit.When using a pedestal (TY-ST85P12) for the installation of the display, use a clamper suppliedwith the display to secure the LAN cable. For use with another method of installation, refer tothe corresponding Installation Instructions.58