Panasonic TH-103VX200U Operating Instructions Manual

Contents

Panasonic TH-103VX200U Operating Instructions Manual Manual pdf 57 page image

OPTIONS AdjustmentsItem Adjustments3D EmitterSet the infrared transmitter for the 3D Eyewear.INT: Use the infrared transmitter of the unit.EXT: Use the external 3D IR TRANSMITTER (available separately.)Function button assign 1Function button assign 2Set the function to operate when the FUNCTION button 1 to 2 on the remote control is pressed.3D settings: The “3D SETTINGS” menu is displayed.Scrolling bar: The screen saver activates, and after 15 minutes, the display power shuts down (standby).Test patterns: The test pattern is displayed by switching among seven patterns.Blue only: The screen displays only blue color for image adjustment.Signal: The “SIGNAL” menu is displayed.3D Safety Precautions3D Safety Precautions show/hide is set during power ON.On: 3D Safety Precaution is shown every time when the power is ON.Off: 3D Safety Precaution is not shown when the power is ON.When the setting changes from “On” to “Off”, the confi rmation screen is displayed as below. Pressing“YES” switches the setting.YES NO3D Safety PrecautionsIf Off is selected, the 3D safety precautionswill not be displayed when power is turned on.Change Setting?Memory lock Locks or unlocks saved profi les. Also for setting passwords. (see page 41)Using FUNCTION buttonPressing the FUNCTION button activates one of the following five functions. The settings of functions areperformed with the “Function button assign 1” and “Function button assign 2” on the OPTIONS menu. (see above)The factory preset functions are as described below.FUNCTION 1 Button: 3D SETTINGSFUNCTION 2 Button: SIGNAL3D SETTINGS / SIGNALThe “3D SETTINGS” menu is displayed.(Example: 3D SETTINGS)ON3D EYEWEAROFFAUTO3D INPUT FORMAT3D SETTINGSLEFT/RIGHT SWAPSAFETY PRECAUTIONSPressing the FUNCTION button clears the menu.SCROLLING BAR / TEST PATTERNS / BLUE ONLYConfi rmation screen (Example: SCROLLING BAR)YES N OFUNCTION 1SCROLLING BARSCROLLING BARActivates the SCROLLING BAR ONLY screensaver.After 15 minutes, the display enters standby mode.To exit this mode, press any button.BLUE ONLYThe screen displays only blue color for image adjustment.To exit this mode, press FUNCTION button.Note:PC POWER MANAGEMENT and AUTO POWER OFF are deactivated during SCROLLING BAR or TEST PATTERNS operation. (see page 46)Press toselect“YES”.Press.TEST PATTERNSEach time you press , a different test pattern is displayed (seven in all).Color Bars Red GreenBlueFrame(2 lines × 2 dots)Black 1% windowTo exit this mode, press any button other than .The operation starts.57