Panasonic TH-37PA20U/P Operating Instructions Manual

Also see for TH37PA20U - 37" SDTV PLASMA DISPLAY: Service update information

Contents

13Cable ConnectionFollow this diagram when connecting your television to a VCR only.Note: The remote control must be programmed with supplied codes to operate the VCR (see page 56, 57).VCR ConnectionProcedure1. Select ANT1 in the SET UP menu. (See page 24)2. Tune the television to the television program you would like to view.Viewing a television programProcedure• Option A1. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.2. Begin the video.• Option B1. Select ANT2 in the SET UP menu.2. Tune the television to Channel 3 or 4, depending on your VCR.3. Begin the video.Viewing a videoProcedure• Option A (Recording and viewing the same program)1. Select ANT2 in the SET UP menu.2. Tune the television to Channel 3 or 4, depending on your VCR.3. Using the VCR, tune to the television program you would like to record.4. Begin recording.• Option B (Recording one program while viewing another program)1. Select ANT1 in the SET UP menu.2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.3. Using the VCR, tune to the television program you would like to record.4. Begin recording.5. Press the TV/VIDEO button on the remote control to switch back to TV mode.6. Tune the television to the program you would like to view.Recording a television programPROG OUTCOMPONENT VIDEO INPUTS VIDEODIGITALINVIDEOYP BLRLRANT 1 ANT 2PR1 21 2INPUTVIDEOTO AUDIOAMP AUDIOS-VIDEOVIDEOANT INPUTANT OUTPUTAUDIORLSPLITOUTCONNECTIONS ON BACK OF TVIncoming CableCABLES NOT SUPPLIEDVCRUse either the S-Video orthe Video connection.Ferrite core(large size)(supplied)Less than4” (10cm)