Panasonic TH-37PA20U/P Operating Instructions Manual

Also see for TH37PA20U - 37" SDTV PLASMA DISPLAY: Service update information

Contents

55Programming Without A Code (When the code is not known)This procedure searches all codes and is called the “sequence method.”1 Confirm that the external component is plugged in and on.2 Turn the component off.3TVDTVCBL AUXDVDVCRDBSRCVR4POWER +ACTIONCHCHVOL VOLPress POWER and ACTION together, for at least 5seconds.After 5 seconds, all the illuminated mode keys willbegin to flash.Release the POWER and ACTION key.Press the mode key.The mode key will illuminate steadily, all others will goout.Press to move forward to the next code, or to movebackward.Press the Remote Control POWER to test the component. If the procedure wassuccessful, the component will turn on.56 POWERPIP MAXFFRECALLMOVESPLITPLAYR-TUNE PROGGUIDESAPPAGEEXITSTOPPAUSE RECPIP MINREWSEARCHOPEN/CLOSEMUTEASPECTTV/VIDEOLIGHTFREEZETV/VCRPIPPIP CHVCR CHCHCHVOL VOLACTIONSWAPPOWERPCMENU1 2 34 5 67 809DTVAUXDVDVCRDBSRCVRCBLTVACTIONCHCHVOL VOLNote:The step and set mode will start from the current device (not the beginning of thelist, except for the first time).Note:Repeat the above steps until the component code is found. It may take manyattempts before the correct code is found.7ACTIONCHCHVOL VOLAfter the code is found, press ACTION to store the code.Operating peripheral equipment using the remote control