Panasonic TH-37PR10B Operating Instructions Manual

28ScreensaverStartFunctionModeSide panelWobblingPeak limitFinish TimeStart TimeWhite bar scrollOff6:1512:30HighOffOffPRESENT TIME 99:99ScreensaverStartFunctionModeSide panelWobblingPeak limitOperating TimePeriodic TimeWhite bar scrollInterval12:003:00HighOffOffPRESENT TIME 15:00ScreensaverStartFunctionModeSide panelWobblingPeak limitFinish TimeStart TimeWhite bar scrollTime Designation6:1512:30HighOffOffPRESENT TIME 15:10ScreensaverStartFunctionModeSide panelWobblingPeak limitFinish TimeStart TimeWhite bar scrollTime Designation6:1512:30HighOffOffPRESENT TIME 15:00ScreensaverStartFunctionModeSide panelWobblingPeak limitOperating TimePeriodic TimeWhite bar scrollInterval12:003:00HighOffOffPRESENT TIME 15:00ScreensaverStartFunctionModeSide panelWobblingPeak limitFinish TimeStart TimeWhite bar scrollTime Designation0:000:00HighOffOffPRESENT TIME 15:10ScreensaverStartFunctionModeSide panelWobblingPeak limitOperating TimePeriodic TimeWhite bar scrollInterval0:000:00HighOffOffPRESENT TIME 15:002/2SetupScreensaverMULTI DISPLAY SetupSet up TIMERPRESENT TIME SetupScreensaverStartFunctionModeSide panelWobblingPeak limitFinish TimeStart TimeWhite bar scrollOff6:1512:30HighOffOffPRESENT TIME 99:99Screensaver (For preventing image retention)Setup of Screensaver TimeAfter selecting Time Designation or Interval, the relevant Time Setup will become available for selection and theOperating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.)Press to select Start Time / Finish Time(When Time Designation is selected).Press to select Periodic Time / Operating Time(When Interval is selected).Press to setup.button: Forwardbutton: BackNote: Timer function will not work unless “PRESENT TIME” is set.Notes:• Pressing “ ” or “ ” button once changes the Time 1minute.[However, switching occurs every 15 minutes when Periodic Time is selected.]• Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.Reduces screen image retentionThese functions prevent the occurrence of an “image retention” on the display when turned ON.Wobbling: Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention ofsharper contour of image.On1: Shifts the image every 30 seconds.On2: Shifts the image at a dot level pitch depending on screen-detection.Peak limit: Suppresses image contrast (peak brightness).Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 41)Press to select “Screensaver”.Press to display Screensaver menu.Press to select “Wobbling” or “Peak limit”.Press to select “On1”, “On2” or “Off” (Wobbling).“On” or “Off” (Peak limit).231 Press to display the Setup menu.