Panasonic TH-37PR10B Operating Instructions Manual

44Specifi cationsTH-37PR10B TH-42PR10BPower Source 220 - 240 V AC, 50/60 HzPower ConsumptionPower on 325 W 365 WStand-by condition Save off 1.0 W, Save on 0.8 W Save off 1.0 W, Save on 0.8 WPower off condition 0.5 W 0.5 WPlasma Display panel Drive method : AC type37-inch, 16:9 aspect ratioDrive method : AC type42-inch, 16:9 aspect ratioScreen size 818 mm (W) × 461 mm (H)× 939 mm (diagonal)920 mm (W) × 518 mm (H)× 1,056 mm (diagonal)(No.of pixels) 737,280 (1,024 (W) × 720 (H))[3,072 × 720 dots]786,432 (1,024 (W) × 768 (H))[3,072 × 768 dots]Operating conditionTemperature 0 °C - 40 °CHumidity 20 % - 80 %Applicable signalsScanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i ·50i · 24p · 25p · 30p · 24sF ···· SMPTE274M, 1250 (1080) / 50iPC signals VGA, SVGAXGA, SXGA, UXGA ···· (compressed)Horizontal scanning frequency 15 - 110 kHzVertical scanning frequency 48 - 120 HzVGA, SVGA, XGASXGA, UXGA ···· (compressed)Horizontal scanning frequency 15 - 110 kHzVertical scanning frequency 48 - 120 HzConnection terminalsPC IN (HIGH-DENSITY MINI D-SUB 15PIN) Y or G with/sync 1.0 Vp-p (75 Ω)Y or G without/sync 0.7 Vp-p (75 Ω)B/PB/CB : 0.7 Vp-p (75 Ω)R/PR /CR : 0.7 Vp-p (75 Ω)HD/VD : 1.0 - 5.0 Vp-p (high impedance)VBS (use HD port) with/picture 1.0 Vp-p (high impedance)without/picture 0.3 Vp-p (high impedance)AUDIO IN (M3 JACK) 0.5 Vrms (high impedance)SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLEAccessories SuppliedFixing bands TMME203 × 2Dimensions (W × H × D) 917 mm × 644 mm × 95 mm(109 mm when including protruding portion of slots)1,020 mm × 705 mm × 95 mm(109 mm when including protruding portion of slots)Mass (weight) approx. 25.0 kg net approx. 28.0 kg netSoundSpeaker 120 mm × 60 mm × 2 pcs, 8 ΩAudio Output 20 W [10 W + 10 W] (10 % THD)Notes:• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.• This equipment complies with the EMC standards listed below.EN55022, EN55024, EN61000-3-2, EN61000-3-3.