Panasonic TH-42PHD5 Operating Instructions Manual

Also see for TH-50PHD5: Troubleshooting guide Operating instructions

13Basic ControlsStand-by (ON/OFF) buttonThe Plasma Display must first be plugged into thewall outlet and turnded on at the power switch.(see page 14)Press this button to turn the Plasma Display On,from Standby mode. Press it again to turn thePlasma Display Off to Standby mode.N button(see page 21, 22, 24, 25)PICTURE button(see page 24)PICTURE POS./SIZE button(see page 20)PC buttonPress the “PC” mode selectionbutton to select the PC mode.This button is used to switchdirectly to PC mode.TH-50PHD5R - STANDBYG POWER ONINPUT — VOL +Main Power On/Off Switch Volume AdjustmentPress the Volume Up “+”or Down “–” button toincrease or decrease thesound volume level.INPUT button(AV(S Video), Component/RGB andPC Mode Selection)Press the “INPUT” button to select AV(S Video), Component /RGB and PCinput signal modes sequentially.(see page 15)Power IndicatorThe Power Indicator will light.• Power-OFF .. Indicator not illuminated(The unit will still consume some power aslong as the power cord is still inserted intothe wall outlet.)• Stand-by ...... Red• Power-ON ........ GreenStatus buttonPress the “Status” Button to displaythe current system status.1 AV(S Video), Component/RGB,PC mode2 Aspect mode (see page 18)3 Off timerThe off timer indicator is displayedonly when the off timer has been set.Off timer 90231AV4:3INPUTSURROUNDVOLN RPICTURE SOUND SET UPASPECTPICTUREPOS. /SIZEOFF TIMERPCExplanations from here onward describe the functions when the optional BNC Terminal Board is installed.INPUT buttonAV(S Video), Component/RGBand PC Mode Selection)Press to select AV(S Video),Component/RGB and PC inputsignal modes sequentially.(see page 15)SURROUND button(see page 23)Sound mute On/Off (see page 22)Volume AdjustmentPress the Volume Up “+” or Down“–” Button to increase or decreasethe sound volume level.ASPECT buttonPress to adjust the aspect.(see page 18)OFF TIMER buttonThe Plasma Display can be preset to switch to stand-by after a fixed period.The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes(off timer cancelled) each time the button is pressed.When three minutes remain, “Off timer 3” will flash.The off timer is cancelled if a power interruption occurs.30 60090SET UP button (see page 16)POSITION buttonsR button (see page 17)ACTION buttonPress to make selectionsSOUND button (see page 22)