Panasonic TH-42PHD5 Operating Instructions Manual

Also see for TH-50PHD5: Troubleshooting guide Operating instructions

31Set up TIMERSetupSignalScreensaverComponent/RGB-in selectRGBOSD Language English (UK)3D Y/C Filter (NTSC)Colour system3:2 PulldownOnAutoOffPanasonic Auto (4:3) 4 : 3Signal [ AV ]Signal [ Component ]3:2 Pulldown OffSetup for Input SignalsColour system / Panasonic AutoSelect Signal from the “Setup” menu during AV(S Video) inputsignal mode. (“Signal [AV]” menu is displayed.)Press to select the “Colour system” or“Panasonic Auto”.Press to select each functions.3D Y/C Filter (NTSC)Colour system3:2 PulldownOnAutoOffPanasonic Auto (4:3) 4 : 3Signal [ AV ]If the picture image becomes unstable:With the system set on Auto, under conditions oflow level or noisy input signals the image may inrare cases become unstable. Should this occur,set the system to match the format of the inputsignal.Set up TIMERSetupSignalScreensaverComponent/RGB-in selectRGBOSD Language English (UK)Press (ACTION) button3:2 PulldownSelect “Signal” from the “Setup” menu during AV(S Video) or Component inputsignal mode.(“Signal [AV]” menu is displayed.)Press to select 3:2 Pulldown.Press to set On/Off.Press to exit from adjust mode.RPress (ACTION) buttonModeColour systemPanasonic Auto(4:3)FunctionSet the colour system to match the input signal. If set to “Auto”, the colour system is determinedautomatically.Set to “4 : 3” to view 4:3 images in an unchanged format when Panasonic Auto isselected. If you would like to view 4:3 images in “Just” format, set to “Just”.Auto PAL SECAM M.NTSC NTSCNote:When On, this setting only affects the following signal input.• NTSC signal input during “AV(S Video)” input signal mode.• 525i(480i) signal input during “Component” input signal mode.When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, whichare recorded at 24 frames per second.If the picture is not stable, turn the setting to off.