OptionsOnWeekly Command TimerOnscreen displayOffInitial INPUTInitial VOL level1/3OffOff00Maximum VOL levelOffINPUT lockOffButton lockOffRemocon User levelOffAdvanced PIP1/3OptionsOff-timer functionINPUT lockStudio W/BAdvanced PIPDisplay sizeInitial VOL levelMaximum VOL levelInitial INPUTOnscreen displayOffOffOffOffEnableOnOff0OffOff021Advanced PIP1235Press to display the Setup menu.Press to select “OSD Language”.46Notes:• Advanced PIP corresponding signal• If “Input lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.• Sound output is from the picture which is selected in Audio Out (PIP) (See page 25).• In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity ofthe pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signalsdisplayed on the main picture and depending on the 2-picture display mode.• Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.• Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily.• Following combinations of two analog signals cannot be displayed simultaneously;Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)• Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals.Sub screen Main screenNTSC, PAL, SECAM (tuner, video)525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i,1250/50i (Component Video, RGB, DVI, SDI, HDMI)640x480@60Hz, 852x480@60Hz, 1024x768@60Hz,1366x768@60Hz (RGB, DVI, HDMI)1280x768@60Hz (DVI)Note:To use , , , buttons for the screen operations, follow the procedures in the previous page.7(When Advanced PIP is On)Press to exit fromOptions menu.Press to adjust themenu.Off : Sets normal twoscreen displaymode (see page20).On : Sets AdvancedPIP mode.Press and hold until the Options menu is displayed.Press to select Advanced PIP.Press repeatedly.Each time pressing this button main picture and sub picturewill be displayed as above.TH-42PS10BK/STH-42PH10BK/S, TH-50PH10BK/S,TH-58PH10BKOne screen Advanced PIPMain screenSub screen 1 2 36 5 4