Panasonic TH-42PS10BK Operating Instructions Manual

Also see for TH-42PH10BK: Operating instructions Service manual

Panasonic TH-42PS10BK Operating Instructions Manual Manual pdf 8 page image

SLOT11 212 12SERIALPC INAUDIOSLOT2 SLOT3VIDEOAUDIOR L AUDIOR LAV INB AS VIDEO8ConnectionsSPEAKERSTerminals (R)SPEAKERSTerminals (L)When connecting the speakers, be sure to use only the optional accessory speakers.Refer to the speaker’s Installation Manual for details on speaker installation.(Example: TH-42PH10BK)AC cord connection(see page 12)Speakers (Optional accessories)– Cable fi xing bands Secure any excess cables with bands as required.Pass the attached cablefixing band through the clipas shown in the figure.To secure cables connected to Terminals, wrap the cable fixing band around themthen pass the pointed end through the locking block, as shown in the figure.While ensuring there is sufficient slack in cables to minimize stress (especiallyin the power cord), firmly bind all cables with the supplied fixing band.To tighten: To loosen:PullPullPush the catch– AC cord fi xingNotes:• On TH-42PH10BK/S, TH-50PH10BK/S and TH-58PH10BK, Terminal board is installed in SLOT 1 at factory shipment.• On TH-42PS10BK/S, SLOT 1-3 are all empty at factory shipment.Dual Video Terminals (equivalentof BNC Dual Video Terminal Board(TY-FB9BD)) (see page 11)From EXTERNALmonitor terminal onComputer (see page 9)From SERIAL Terminalon Computer(see page 10)Optional TerminalBoard Insert Slot(covered)Note:Make sure that the AC cord is lockedon both the left and right sides.Plug the AC cord into the display unit.Plug the AC cord until it clicks.Unplug the AC cordUnplug the AC cordpressing the twoknobs.Note:When disconnecting the AC cord, beabsolutely sure to disconnect the ACcord plug at the socket outlet first.