Panasonic TH-42PW4 Operating Instructions Manual

Also see for Viera TH-37PWD4: Service manual Operating instructions User guide Operating instructions Operating instructions

25Note:There is little change when Picture is increased with a bright picture or reduced with a dark picture.Picture AdjustmentsItemContrastBrightnessColourTint(NTSC only)SharpnessEffect AdjustmentsLess MoreDarker BrighterReddish GreenishSelects the proper brightness anddensity for the room.Adjusts for easier viewing of dark picturessuch as night scenes and black hair.Adjusts slightly to a lighter colour.Adjust for nice skin colour.Displays a sharp image.Notes:(1) “Colour” , “Tint” and “Sharpness”settings cannot be adjusted for“RGB” and “PC” input signalmodes.(2) You can change the level of eachfunction (Contrast, Brightness,Colour, Tint, Sharpness) for eachPicture menu.(3) The setting details for normal,dynamic and cinema respectivelyare memorized separately foreach input mode (AV, Component,RGB).(4) The “Tint” setting can be adjustedfor NTSC signal only.Less MoreLess MoreHelpful Hint ( / Normalise Normalisation)NAdvanced SettingsItemBlackextensionW/B High RW/B High BW/B Low RW/B Low BGammaEffectLess MoreLess MoreLess MoreLess MoreDetailsAdjusts the dark shades of the image in gradiation.Adjusts the white balance for light red areas.Adjusts the white balance for light blue areas.Adjusts the white balance for dark red areas.Adjusts the white balance for dark blue areas.2.0 2.2 2.5Notes:(1) Carry out “W/B” adjustment as follows.A Adjust the white balance of the bright sections using the “W/B High R” and “W/B High B” settings.B Adjust the white balance of the dark sections using the “W/B Low R” and “W/B Low B” settings.C Repeat steps A and B to adjust.Steps A and B affect each other’s settings, so repeat each step in turn to make the adjustment.(2) The adjustment values are memorized separately for each input mode (AV, Component, RGB and PC).(3) The adjustment range values should be used as an adjustment reference.Less MoreDown UpOn the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at anytime or the (Access button) is pressed during “Normalise”, then all adjustment values are returned to the factorysettings.