6The front of the display panel has been speciallytreated. Wipe the panel surface gently using only acleaning cloth or a soft, lint-free cloth.• If the surface is particularly dirty, soak a soft, lint-freecloth in a weak detergent solution and then wring thecloth to remove excess liquid. Use this cloth to wipe thesurface of the display panel, then wipe it evenly with adry cloth, of the same type, until the surface is dry.• Do not scratch or hit the surface of the panel withfingernails or other hard objects. Furthermore, avoidcontact with volatile substances such as insect sprays,solvents and thinner; otherwise, the quality of thesurface may be adversely affected.Check that you have the Accessories and items shownOperatingInstructionRemote controlEUR7627Z50 orEUR7627Z80Batteries for theremote control(AA Battery ⋅ 2)PedestalTY-ST42PX500(TH-42PX500U)TY-ST50PX500(TH-50PX500U)Product RegistrationCard (for U.S.A.)Customer Care PlanCard (for U.S.A.)• Wall-hanging bracket(Angled)TY-WK42PR2U• Wall-hanging bracket(vertical)TY-WK42PV3UCable clamper⋅ 2F-Typeantennaadapter(for 5C-2V)( ⋅ 1)AC cordIR Blaster( ⋅ 1)TNQX016AccessoriesOptional AccessoriesCleaning and maintenanceIf the cabinet becomes dirty, wipe it with a soft, drycloth.• If the cabinet is particularly dirty, soak the cloth in aweak detergent solution and then wring the cloth dry.Use this cloth to wipe the cabinet, and then wipe it drywith a dry cloth.• Do not allow any detergent to come into direct contactwith the surface of the Plasma TV.If water droplets get inside the unit, operating problemsmay result.• Avoid contact with volatile substances such as insectsprays, solvents and thinner; otherwise, the quality ofthe cabinet surface may be adversely affected or thecoating may peel off. Furthermore, do not leave it forlong periods in contact with articles made from rubberor PVC.Ferrite coreLarge size ⋅ 1ZCAT3035-1330Small sizeGray color ⋅ 1ZCAT2235-1030White color ⋅ 4RFC-8Pull back thetabs (in twoplaces) toopen.Put the cableand close.Attaching the ferrite coreBe sure to choose the appropriate size of ferrite core(large or small) and the correct setting of the cable(winding), as indicated by each connection diagram onthe following pages (12, 14).1 2TV1 2 34 5 67 809CHVOLCHVOLOK +-• Floor standTY-S42PX500W(TH-42PX500U)TY-S50PX500W(TH-50PX500U)